# Creep failure of honeycombs made by rapid prototyping

## TL;DR

This study investigates the creep failure behavior of 3D-printed honeycomb lattices made of PMMA at elevated temperature, revealing diffuse initial failure, high damage tolerance to defects, and insights from finite element modeling.

## Contribution

It provides new experimental data on creep failure modes of additively manufactured lattices and demonstrates their damage tolerance despite manufacturing defects.

## Key findings

- Diffuse failure mode observed at elevated temperature
- High damage tolerance to manufacturing and design defects
- Finite element analysis elucidates failure mechanisms

## Abstract

Additive manufacture and rapid prototyping are versatile methods for the generation of lattice materials for applications in the creep regime. However, these techniques introduce defects that can degrade the macro-scopic creep strength. In the present study, the uniaxial tensile response of two-dimensional PMMA lattices is measured in the visco-plastic regime: tests are performed at 100C which is slightly below the glass transition temperature T g of PMMA. Both as-manufactured defects (Plateau borders and strut thickness variation) and as-designed defects (missing cell walls, solid inclusions, and randomly perturbed joints) are introduced. The dispersion in macroscopic strength is measured for relative densities in the range of 0.07 to 0.19. It is observed that initial failure of the lattice is diffuse in nature: struts fail at a number of uncorrelated locations, followed by the development of a single macroscopic crack transverse to the loading direction. In contrast, the same PMMA lattice fails in a correlated, brittle manner at room temperature. An FE study is performed to gain insight into the diffuse failure mode and the role played by as-manufactured defects, including the dispersion in tensile strength of individual struts of the lattice. A high damage tolerance to as-designed defects is observed experimentally: there is negligible knock-down in strength due to the removal of cell walls or to the presence of solid inclusions. These findings aid the design and manufacture of damage tolerant lattices in the creep regime.