Properties of Nanocrystalline Silicon Probed by Optomechanics

TL;DR

This study investigates the optical, mechanical, and thermal properties of nanocrystalline silicon using optomechanical nanobeams, revealing how grain size and boundary volume influence dissipation and nonlinear effects for advanced device applications.

Contribution

It demonstrates how annealing temperature controls nanocrystalline silicon properties and their impact on optomechanical performance, highlighting potential for nonlinear device applications.

Findings

High optical quality factor of 13000 in nanocrystalline Si

Mechanical quality factor of 1700 achieved in the nanobeam

Grain boundary volume fraction affects dissipation and nonlinear effects

Abstract

Nanocrystalline materials exhibit properties that can differ substantially from those of their single crystal counterparts. As such, they provide ways to enhance and optimise their functionality for devices and applications. Here we report on the optical, mechanical and thermal properties of nanocrystalline silicon probed by means of optomechanical nanobeams to extract information of the dynamics of optical absorption, mechanical losses, heat generation and dissipation. The optomechanical nanobeams are fabricated using nanocrystalline films prepared by annealing amorphous silicon layers at different temperatures. The resulting crystallite sizes and the stress in the films can be controlled by the annealing temperature and time and, consequently, the properties of the films can be tuned relatively freely, as demonstrated here by means of electron microscopy and Raman scattering. We show that the nanocrystallite size and the volume fraction of the grain boundaries play a key role in the dissipation rates through non-linear optical and thermal processes. Promising optical (13000) and mechanical (1700) quality factors were found in the optomechanical cavity realised in the nanocrystalline Si resulting from annealing at 950 C. The enhanced absorption and recombination rates via the intra-gap states and the reduced thermal conductivity boost the potential to exploit these non-linear effects in applications, including NEMS, phonon lasing and chaos-based devices.