Upper bound on the GUP parameter using the black hole shadow

TL;DR

This paper derives an upper limit on the GUP parameter based on black hole shadow observations, linking shadow shape deviations to quantum gravity effects, and applies recent M87* data to constrain the parameter.

Contribution

It introduces a novel method to constrain the GUP parameter using black hole shadow deviations and recent observational data.

Findings

GUP parameter constrained to ^{90} from M87* shadow data

Relation established between GUP parameter and shadow deviation from circularity

Provides a new observational bound on quantum gravity effects

Abstract

An upper bound on the parameter that provides a generalized uncertainty principle (GUP) is obtained from the black hole shadow. With the aid of a recent constraint between regular black holes and the GUP parameter, it is indicated a relation between this parameter and the deviation from circularity of the black hole shadow. In the case of the recent announcement of the M87* results from the Event Horizon Telescope collaboration, a deviation from circularity $\lesssim 10\%$ imposes a GUP parameter $\beta_0 <10^{90}$.

Tables

Table 1. Table 1: Upper bounds on the GUP parameter β 0 subscript 𝛽 0 \beta_{0} according to some approaches. Scanning tunneling microscope, Lamb shift and Landau Levels results are found in Ref. Das_Vagenas . Gravitational waves result is found in Ref. Feng , and the upper bounds from the light deflection, pulsar PRS B 1913+16 and perihelion precession were obtained in Ref. Scardigli_Casadio . It is worth mentioning that the work on gravitational waves Feng obtained an even better upper bound when a different GUP was applied ( < 10 20 absent superscript 10 20 <10^{20} , result comparable to upper bounds from quantum mechanics options).

	${\beta }_0$
Scanning tunneling microscope
Lamb shift
Landau levels
Gravitational waves
Perihelion precession
Pulsar (PRS B 1913+16)
Light deflection
Black hole shadow

Equations

$$d{s}^2$$

$${\Delta }_{\theta }=1+\frac{\Lambda }{3}{a}^2{\cos }^2\theta ,\Sigma =r^2+a^2{\cos }^2\theta ,\Xi =1+\frac{\Lambda }{3}{a}^2,$$

$${\Delta }_r=(r^2+a^2)\left(1-\frac{\Lambda }{3}{r}^2\right)-2m(r)r.$$

$$m(r)=M{\left(1+{\left(\frac{r_0}{r}\right)}^q\right)}^{-\frac{3}{q}}.$$

$$r_{-}<r_{+}<r_{++}.$$

$$\frac{\partial S}{\partial \sigma }=\frac{1}{2}{g}^{\mu \nu }\frac{\partial S}{\partial x^{\mu }}\frac{\partial S}{\partial x^{\nu }},$$

$$p_{\mu }\equiv \frac{\partial S}{\partial x^{\mu }}.$$

$$p_t=-E\text{mbox}and{p}_{\varphi }=L.$$

$$S=\pm \frac{1}{2}{\delta }^2\sigma -Et+L\varphi +S_{\theta }(\theta )+S_r(r),$$

$$\Sigma \dot{t}$$

$$\Sigma \dot{r}$$

$$\Sigma \dot{\theta }$$

$$\Sigma \dot{\varphi }$$

$$P$$

$$\mathcal{R}$$

$$\Theta$$

$$Q={\Delta }_{\theta }K-{\left[\left(1+\frac{\Lambda }{3}{a}^2\right)L-aE\right]}^2,$$

$$\xi =\frac{L}{E}\text{mbox}and\eta =\frac{K}{E^2},$$

$$\eta (r_p)=\frac{16r_p^2{\Delta }_r(r_p)}{{\Delta }_r^{\prime }(r_p{)}^2},$$

$$\xi (r_p)=\frac{(r_p^2+a^2){\Delta }_r^{\prime }(r_p)-4r_p{\Delta }_r(r_p)}{\Xi a{\Delta }_r^{\prime }(r_p)}.$$

$$e_0$$

$$e_1$$

$$e_2$$

$$e_3$$

$$\dot{\gamma }=\dot{t}{\partial }_t+\dot{r}{\partial }_r+\dot{\theta }{\partial }_{\theta }+\dot{\varphi }{\partial }_{\varphi }$$

$$\dot{\gamma }=\zeta \left(-e_0+\sin \alpha \cos \beta e_1+\sin \alpha \sin \beta e_2+\cos \alpha e_3\right),$$

$$\zeta=-\frac{(r^{2}+a^{2})E-a\Xi L}{\sqrt{\Delta_{r}\Sigma}}\bigg{|}_{(r_{obs},\theta_{o})}.$$

$$\cos\alpha=\frac{\Sigma\dot{r}}{(r^{2}+a^{2})E-a\Xi L}\bigg{|}_{(r_{obs},\theta_{o})},$$

$$\sin\beta=\frac{\sqrt{\Delta_{\theta}}\sin\theta}{\sqrt{\Delta_{r}}\Xi\sin\alpha}\left(\frac{\Delta_{r}\Sigma\dot{\phi}}{(r^{2}+a^{2})E-a\Xi L}-a\Xi\right)\bigg{|}_{(r_{obs},\theta_{o})}.$$

$$\sin \alpha$$

$$\sin \beta$$

$$x(r_p)$$

$$y(r_p)$$

$$x(r_p)$$

$$y(r_p)$$

$$D=\frac{\Delta x}{\Delta y}=\frac{x_R-x_L}{2y_m},$$

Full text

I Introduction

The Event Horizon Telescope collaboration announced the first black hole image ever captured EHT ; EHT2 . By using interferometry, the collaboration built the shadow of the supermassive black hole (M87*) at the center of the Messier 87 galaxy. As pointed out by the collaboration, the black hole shadow is well-described by general relativity by adopting the Kerr metric in order to interpret the phenomenon. Moreover, the supermassive M87*—whose mass is $M=(6.5\pm 0.7)\times 10^{9}M_{\odot}$ and is $r_{obs}=(16.8\pm 0.8)$Mpc distant from us—presents an almost circular shadow. Accordingly, the shadow of M87* indicates a deviation $\lesssim 10\%$ from circularity. Even with the good agreement with the Kerr metric, options are not totally ruled out. Due to the uncertainty on both the rotation parameter and observation angle, options to Kerr metric are still candidates for M87* shadow Bambi . This article explores that avenue and applies the M87* parameters to Kerr-like objects, like rotating regular black holes.

Shadows of black holes have been studied since the pioneer work of Synge Synge , in which the shadow of the Schwarz-schild black hole was obtained. Bardeen Bardeen2 built the first shadow for a rotating black hole, namely, for the Kerr metric. Since then, whether in the general relativity context or beyond, shadows of different black holes have been published, like shadows for the Reissner-Nordstr m black hole Zakharov , the Kerr-Newman black hole Vries , black holes with a cosmological constant Perlick , Kerr-Newman-NUT black hole Grenzebach , Kerr-Newman-Kasuya black hole Ovgun , braneworld black holes Eiroa1 ; Eiroa2 , rotating wormholes Shaikh and for regular black holes Zi_Bambi ; Abdujabbarov ; Amir , which are focused on this article. It is worth emphasizing that the results exposed here do not consider an accretion disk around the black hole. Accretion disks modify the shadow’s silhouette, and models that consider such influences are being developed Perlick2 ; Cunha ; Roman . The results presented in this article can be used in future researches that include accretion disks, whether made of plasma or dark matter.

As an alternative to singular black holes, regular black holes are solutions of the gravitational field equations without a singularity inside the event horizon. Once again, Bardeen was pionner when constructed the very first regular metric that describes a regular black hole Bardeen . The Bardeen black hole is spherical, i.e., a nonrotating black hole, and is described by a mass function that depends on the radial coordinate. Inside the event horizon, the Bardeen metric hides a de Sitter core instead of a Schwarzschild singularity. A de Sitter core inside the event horizon avoids either the point singularity of spherical black holes Ansoldi ; Lemos_Zanchin ; Dymnikova ; Dymnikova2 ; Dymnikova3 ; Bronnikov ; Hayward ; Neves ; Neves2 or the ring singularity in geometries with axial symmetry Various_axial ; Various_axial2 ; Various_axial3 ; Various_axial4 ; Various_axial5 ; Neves_Saa . As is well-known, the de Sitter core provides energy conditions violations in order to avoid consequences of the singularities theorems.111See Wald’s book Wald for detailed studies on the theorems. Then, the Bardeen regular black hole violates the strong energy condition, and, according to our work Neves_Saa , those with rotation ignore the weak energy condition.

Besides a mass function that depends on the radial coordinate, regular black holes possess a mass function that depends on the parameter related directly to the regular geometry or the absence of a singularity. In Ay n-Beato and Garcia’s work Beato , such a parameter is a charge, and the Bardeen regular black hole is conceived of as a solution of general relativity coupled to a nonlinear electrodynamics for those authors. However, recently, our work Maluf_Neves2 suggested another interpretation to the Bardeen metric. By using a generalized uncertainty principle (GUP), we computed quantum corrections to the Hawking temperature for the Schwarzschild black hole. Thus, we pointed out that, at second order, Bardeen’s regular black hole may be view as a quantum-corrected Sch-warzschild black hole. This new interpretation led to a constraint between a metric parameter, namely, the parameter in the mass function that produces regularity, and the GUP parameter. With the aid of such a relation, the GUP parameter will be estimated using the black hole shadow. The regular black holes used in this shadow calculation come from a class of rotating regular black holes with a cosmological constant published in our article Neves_Saa .

GUPs appear, for example, in candidates for quantum gravity theories and in the deformed quantum mechanics, where the canonical commutation relations are modified in order to provide a minimal length scale and, consequently, its contribution to empirical results, like in the modified hy-drogen-atom spectrum Benczik , Lamb shift, Landau Levels and in the scanning tunneling microscope Das_Vagenas ; Das_Vagenas2 .222See Ref. Tawfik for a review on GUPs. The dimensionless GUP parameter (also called quantum gravity parameter) deforms the Heisenberg relation, and with $\beta_{0}=0$, where $\beta_{0}$ is the mentioned parameter, Heisenberg’s uncertainty relation is recovered. There is a debate on the value of the GUP parameter Das_Vagenas ; Scardigli_Casadio ; Feng . Assuming that the GUP parameter is $\beta_{0}\sim 1$ implies that effects of $\beta_{0}$ are hard or too small to be detected. But without such an a priori assumption, it is possible to obtain upper bounds on the GUP parameter by using recent experiments. Like Ref. Scardigli_Casadio , where the upper bounds were built with the aid of the light deflection and perihelion precession, and Ref. Feng , where gravitational waves were adopted, in this work an option in the strong gravitational field regime (the shadow of M87*) is used in order to obtain an upper bound on $\beta_{0}$. In general, as we will see, gravitational systems offer worse upper bounds than quantum options, like the Lamb shift, Landau Levels or the scanning tunneling microscope used in Ref. Das_Vagenas .

As I said, the deviation from circularity, reported by the collaboration, will be used in order to estimate the GUP parameter. It is worth emphasizing that the class of rotating regular black holes used here and presented in Ref. Neves_Saa generalizes earlier Kerr-like regular solutions because it possesses a general mass function $m(r)$ and a cosmological constant. The shadow of that class has its silhouette presented here for the first time in the literature. With the M87* parameters, by assuming that the angle between the black hole rotation axis and the observer is $\theta_{obs}=17^{\circ}$ (in agreement with observed jets supposedly aligned with the rotation axis EHT ; Walker ), it is indicated the $\beta_{0}<10^{90}$ as upper bound on the GUP parameter.

The structure of this paper is as follows: in Section 2, the geodesic equations for the class of rotating regular black holes and equations that provide the shadow’s silhouette were derived. In Section 3, two shadow’s observables are indicated, oblateness and root-mean-square distance from the average radius of the shadow, which gives the deviation from circularity, such that the latter was computed in order to provide an upper bound on the GUP parameter in Section 4. In Section 5, the final remarks are made.333In this work, I adopted geometric units such that $G=c=1$, where $G$ is the gravitational constant, and $c$ is the speed of light in vacuum. For the evaluation of the GUP parameter, the M87* data were used, and, consequently, $G$ and $c$ were restored.

II The shadow of rotating regular black holes

Let us obtain the shadow of rotating regular black holes with a cosmological constant in this section. Firstly, the spacetime metric and its geodesic equations are shown, then the silhouette equations are computed.

II.1 Spacetime metric and geodesic equations

In this article, shadows are obtained from a class of rotating regular black holes developed in Ref. Neves_Saa . The spacetime metric of that class—using the Boyer-Lindquist coordinates—is given by

[TABLE]

where

[TABLE]

and

[TABLE]

The constant $\Lambda$ is the cosmological constant, $a$ is the rotation parameter and, for the class of regular black holes studied here, the black hole mass depends on the radial coordinate $r$, namely,

[TABLE]

The mass function (4) provides black holes without a singularity.444Aspects of regular black holes with the mass function (4) were studied: thermodynamics in Ref Maluf_Neves1 , accretion of perfect fluids in Ref. Neves_Saa2 , and cosmic strings in Ref. Ceren . For different values of the integer $q$, we have well-known regular black holes. For example, for the spherical case, $q=2$ provides the Bardeen black hole Bardeen , and $q=3$ produces the Hayward regular metric Hayward , but the mass function also gives axisymmetric regular black holes or Kerr-like black holes. The parameter $M$ is the mass parameter (for large values of $r$, $m(r)\sim M$), and $r_{0}$ is a length parameter that provides regular metrics, parameter conceived of as a microscopical constant related to both the GUP parameter and the Planck length according to our work Ref. Maluf_Neves2 (in Section 4 such a parameter will be briefly discussed).

Due to cosmological observations Planck , I will focus on the positive cosmological constant in this article. In this case, regarding $r_{0}\ll M$, the function $\Delta_{r}$ provides three roots: the inner horizon $r_{-}$, the event horizon $r_{+}$, and the cosmological horizon $r_{++}$. Then, the spacetime structure reads

[TABLE]

In order to construct the black hole shadows of the class of rotating regular black holes given by Eq. (1), the geodesic equations are needed. Geodesics for the Kerr metric were obtained by Carter Carter , who showed the separability of the geodesic equations. Carter argued that a test particle in the Kerr spacetime possesses four constants of motion along geodesics. Accordingly, one has the two Killing vector fields $\xi_{t}$ and $\xi_{\phi}$ with their respective constants, the mass of the test particle and the fourth constant, which is called Carter constant (indicated by $K$). Both the Kerr-anti-de Sitter and Kerr-de Sitter spacetimes present those same four constants for test particles along geodesics, whether in the general relativity realm Hackmann or in the brane world, as we indicated in Ref. Neves_Molina . The class of rotating regular black holes given by (1) also presents these constants.

The geodesic equations for the spacetime (1) are obtained from the Hamilton-Jacobi equation:

[TABLE]

where $\sigma$ is a parameter related to the affine parameter $\tau$ (i.e., $\tau=\delta\sigma$, with $\delta$ playing the role of mass of the test particle along the geodesic). The function $S$ is the Jacobi action, which is related to the generalized momentum through

[TABLE]

From the two Killing vector fields $\xi_{t}$ and $\xi_{\phi}$ given by the geometry with axial symmetry (1), we have the particle’s constants of motion $E$ and $L$, namely, energy and angular momentum, respectively,

[TABLE]

Following Carter, it is assumed that $S$ may be written as

[TABLE]

where plus and minus mean the de Sitter and anti-de Sitter cases, respectively,555From the condition $g_{\mu\nu}\dot{x}^{\mu}\dot{x}^{\nu}=\pm\delta^{2}$, the signal plus and minus are due to the norm of timelike vectors in de Sitter and anti-de Sitter spacetimes, respectively. and expressions for $S_{\theta}$ and $S_{r}$ will be omitted here. As is known in general relativity, from the Lagrangian $\mathcal{L}$, the generalized momentum is defined as $p_{\mu}\equiv\frac{\partial\mathcal{L}}{\partial\dot{x}^{\mu}}=g_{\mu\nu}\dot{x}^{\nu}$, where dot means ordinary derivative with respect to the parameter $\sigma$. Therefore, from that definition and Eq.(9), substituted into Eq. (7), one has the geodesic equations for the metric (1), which in the coordinate basis are

[TABLE]

where $\Sigma$ is given by Eq. (2). The functions $P$, $\mathcal{R}$ and $\Theta$ are written as

[TABLE]

As I said, the parameter $\delta$ represents the mass of the particle along the geodesic, so $\delta=0$ in the case studied here. The constant $Q$ is related to Carter’s constant $K$, that is to say,

[TABLE]

which vanishes for equatorial orbits.

II.2 The shadow’s silhouette

In particular, for the shadow phenomenon, only photons orbits, or null geodesics, will be adopted ($\delta=0$). And as the cosmological context is considered in this article, the cosmological constant will be assumed positive, i.e., $\Lambda>0$. Following Grenzebach , two new parameters are defined as

[TABLE]

which are constants in the shadow’s silhouette. Such a silhouette is given by unstable photon orbits with $r=r_{p}$ constant outside the event horizon, i.e., $r_{p}>r_{+}$. In such orbits, photons may either fall into the black hole or escape to the observer position. Thus, according to geodesic equation $\dot{r}$, we have $\mathcal{R}(r_{p})=\mathcal{R}^{\prime}(r_{p})=0$ in order to provide the unstable orbits (the symbol ′ means derivative with respect to $r$). Typically, for a black hole with rotation $r_{p}=r_{p-}$ and $r_{p}=r_{p+}$ (with $r_{p-}\leq r_{p+}$), i.e., there are both a minimum and a maximum value for $r_{p}$, and the edge of the black hole shadow should be built for those values of $r_{p}$. That is, as we will see, the left and the right sides of the shadow can be different for rotating black holes due to the spacetime dragging. On the other hand, for the Schwarzschild black hole $r_{p-}=r_{p+}=3M$ (in the Schwarzschild case, $M$ is the black hole mass or the Arnowitt-Deser-Misner mass), and the shadow is perfectly symmetrical. The equations that involve $\mathcal{R}(r_{p})$ and its derivative lead to

[TABLE]

and

[TABLE]

As we will see, these conserved quantities are part of the equations that “draw” the shadow.

It is worth emphasizing that the metric (1) is not necessarily asymptotically flat, it is either asymptotically de Sitter or anti-de Sitter for $\Lambda\neq 0$. Thus, a given observer is not at infinity describing the black hole shadow, indeed he/she is in the domain of outer communication, which is the region defined in between the event horizon $r_{+}$ and the cosmological horizon $r_{++}$ in the de Sitter case. Therefore, the observer will be located at the point with coordinates ($r_{obs},\theta_{o}$), according to Fig. 1. In terms of the observer position, because of the axial symmetry, the black hole shadow depends only on the radial and polar coordinates. The coordinate $\theta_{o}$ stands for the observer angle, which is the position in which the shadow is observed in relation to the rotation axis, and the parameter $r_{obs}$ is the distance from the black hole. Following Grenzebach , it is adopted the orthonormal tetrad $e_{a}^{\mu}=(e_{0}^{\mu},e_{1}^{\mu},e_{2}^{\mu},e_{3}^{\mu})$ in order to describe the shadow silhouette. That is, the null congruences coming from $r_{p-}\leq r\leq r_{p+}$ reaches the observer and are projected onto the tetrad, then the shadow phenomenon is described by using $e_{a}^{\mu}$. Such a tetrad is written with the aid of the coordinate basis vectors $(\partial_{t},\partial_{r},\partial_{\theta},\partial_{\phi})$, therefore we have

[TABLE]

According to Grenzebach et al. Grenzebach , the direction of $e_{3}$ points toward the black hole (see Fig. 1), and $e_{0}$ is the observer’s four-velocity, then in this case the observer is not necessarily at rest. The tetrad is chosen such that $e_{0}\pm e_{3}$ is tangential to the principal null congruence direction for a metric like (1).

The null congruence, that is to say, the light rays that come from the region defined by $r_{p}$, are conceived of as curves $\gamma$ such that their tangent vectors are given by

[TABLE]

in the coordinate basis. According to Ref. Grenzebach , at the observer position, $\dot{\gamma}$ is described by the tetrad $e_{a}^{\mu}$, i.e.,

[TABLE]

where the new angles $\alpha$ and $\beta$ are celestial coordinates as indicated in Fig. 1. The description of the black hole shadow is made by using these coordinates. The factor $\zeta$ is obtained from Eqs. (22)-(23) and the tetrad equations, such that

[TABLE]

From the factor $\zeta$, by comparing terms in Eqs. (22) and (23) with the aid of the equations for the tetrad, the celestial coordinates are straightforwardly written as

[TABLE]

[TABLE]

Then, using the geodesic equations for $\dot{r}$ and $\dot{\phi}$, substituting them into Eqs. (25)-(26), we obtain simple expressions for $\alpha$ and $\beta$, namely,

[TABLE]

As we can see, the equations that describe the celestial coordinates depend on the observer position $(r_{obs},\theta_{o})$ and parameters of the photon orbits, also known as photon “sphere”.

In order to describe the shadow’s silhouette it is appropriate to define the Cartesian coordinates

[TABLE]

Therefore, the parametric equations (29) and (30) draw the shadow’s silhouette. According to Fig. 2, the shadow is symmetrical to the $x$-axis. For a Kerr black hole with mass $M$, the silhouette depends on the rotation parameter $a$ and the observer polar angle $\theta_{o}$, considering an observer at infinity. On the other hand, for the de Sitter case, the observer is in the domain of outer communication ($r=r_{obs}$), but still far away from the black hole, and the silhouette depends on the cosmological constant as well. In particular, according to Fig. 3, the shadow will depend on the parameters of the mass function (4) for regular black holes as well. As we will see, the parameter $r_{0}$, which generates regular metrics, can increase the distortion or the deviation from circularity and decrease the size of the shadow.

As is known from the Kerr metric, the black hole shadow (its form or silhouette) is strongly sensible to the parameters $a$ and $\theta_{o}$. However, for the class of regular black holes given by (1), we have two new parameters that modify the shadow: $q$ and $r_{0}$. Here it is shown just cases in which the rotation parameter is smaller than the black hole mass, i.e., $a^{2}<M^{2}$, and, in order to produce shadows compatible with M87*, it is adopted $r_{0}\ll M$, which, alongside $a^{2}<M^{2}$, provides the spacetime structure with three horizons indicated by (5). As we can see from Fig. 2 and Fig. 3, for $\theta_{o}\neq 0$, the more rotation, the more moved in the positive $x$-direction the shadow is. Such a motion points toward the rotation direction. In particular, the silhouette is deformed on the left (assuming that the rotation is from left to right) for large values of $a$, $\theta_{o}$ and for $r_{0}$. This difference between the left and the right sides is due to the photon orbits and the spacetime dragging. On the left, photons travel in the same direction of the black hole rotation, on the right they travel in the opposite direction. Points on the left and on the right in the shadow’s silhouette are given by $r_{p-}$ and $r_{p+}$, respectively. In Fig. 3, we see the parameter $r_{0}$ can increase the shadow deformation for large values of $\theta_{o}$. On the other hand, small values of $\theta_{o}$ can produce highly symmetrical shadows even for large values of $a$. Assuming that the M87* is observed at $17^{\circ}$, we note that the deviation from circularity is small, and, for large values of $\theta_{o}$, interestingly large values of $r_{0}$ decrease the shadow size, according to Fig. 3 (see the second and the third shadows).

III Oblateness and deviation from circularity

In this section, two observables are built, oblateness and deviation from circularity. But following the Event Horizon Telescope collaboration, I will use the latter in order to compute an upper bound on the GUP parameter.

III.1 Oblateness

Following Refs. Bambi ; Maeda ; Tsupko ; Kumar , let us construct two observables for the black hole shadow. The first one indicates the difference between the $x$ and $y$ axes. Such a difference $D$ is the oblateness. The second one, which was used for the Event Horizon Telescope collaboration, provides the shadow’s deviation from circularity using the root-mean-square of the shadow’s radius.

In order to evaluate $D$, one adopts an approximation for the Cartesian celestial coordinates $x$ and $y$ due to the large distance of the observer, $r_{obs}=(16.8\pm 0.8)$Mpc, which turns the value of $\alpha$ into a small quantity. Thus, Eqs. (29) and (30) are rewritten as

[TABLE]

The oblateness is simply defined as

[TABLE]

in which

[TABLE]

where $r_{p-}$ is solution of $\sin\beta=1$, and $r_{p+}$ is given by $\sin\beta=-1$. According to Fig. (4), the values $x_{L}$ and $x_{R}$ (left and right) indicate maximum and minimum values assumed by the shadow silhouette on the $x$-axis. On the other hand, $y_{m}$ is obtained from (32) and its maximum, i.e., $\frac{dy(r_{p})}{dr_{p}}=0$ leads to

[TABLE]

And the roots of Eq. (35) provide the value of $r$ at which

[TABLE]

The parameter $r=r_{p^{\prime}}$ ($r_{p-}<r_{p^{\prime}}<r_{p+}$) indicates the silhouette’s maximum value on the $y$-axis. And, as we can see in all shadows shown here, $\pm y_{m}$ are maximum and minimum values of $y$ due to axial symmetry. Moreover, as we will see, the parameters $x_{L}$, $x_{R}$, and $y_{m}$ will be useful in order to construct the deviation from circularity using the root-mean-square of the shadow’s radius.

By using Eq. (33) for members of the class of rotating regular black holes studied here, Fig. 5 indicates a strong dependence between oblateness and the rotation parameter $a$. The more rotation, the more deformed the shadow is. Moreover, the parameter $r_{0}$, which is related to the GUP parameter, modifies $D$, decreasing the oblateness.

III.2 Deviation from circularity

According to the Event Horizon Telescope collaboration EHT , a measure for the shadow deformation is provided by the deviation from circularity, which is conceived of as deviation from the root-mean-square of the radius $l(r_{p})$. Following Bambi et al. Bambi (but here another parameterization is adopted666Bambi et al. Bambi use the angle defined by $l$ and the $x$-axis in order to parameterize the shadow radius.), the shadow radius $l(r_{p})$ is defined as

[TABLE]

with $x_{c}=x(r_{p^{\prime}})$ and $y_{c}=0$ (see Fig. 4). The average radius (root-mean-square) is given by

[TABLE]

According to the cited authors, who follow the report from the collaboration, the deviation from circularity is conceived of as the root-mean-square distance from the average radius $l_{RMS}$, that is to say,

[TABLE]

However, as I said, another parametrization is adopted and suggested here, demanding that $(x_{R}-x_{L})$ is in the denominator of (39). Like the oblateness, $\Delta C$ increases with the black hole rotation and the observation angle (see Fig. 5). The Event Horizon Telescope reported $\Delta C<0.1$ assuming a Kerr metric as the geometry of M87*. Here Kerr-like objects are adopted, and using the M87* parameters the deviation from circularity given by Eq. (39) will provide an upper bound on the GUP parameter.

IV Estimating the quantum gravity parameter

In order to constrain the GUP parameter, it is necessary to relate it to the spacetime metric. In Ref. Maluf_Neves2 , it is applied a GUP in order to calculate quantum corrections to the black hole temperature. From the GUP

[TABLE]

where $l_{p}=\sqrt{\frac{\hslash G}{c^{3}}}\approx 10^{-35}\ \text{m}$ is the Planck length, and $\beta_{0}$ is the so-called GUP parameter or the dimensionless quantum gravity parameter (as we can see, it is straightforward that for $\beta_{0}\rightarrow 0$ we have the standard uncertainty relation), we derived the quantum-corrected temperature for the Schwarzschild black hole and, interestingly, such a temperature is the Hawking temperature for the Bardeen regular black hole (up to second order approximation in $l_{p}/r_{+}$). Thus, the Bardeen metric was interpreted as a quantum-corrected Schwarzschild black hole under the assumption that the GUP parameter could be related to a metric parameter ($r_{0}$, the parameter that generates regular black holes introduced in Section 2), namely,

[TABLE]

Assuming that the relation (41) is valid for the entire class of regular black holes, for any $q$ in Eq. (4), whether spherical or axisymmetric black holes, then the shadow of M87* can provide an upper bound on $r_{0}$ and, consequently, on $\beta_{0}$. That is to say, the deviation from circularity (39) depends on the spacetime metric and its parameters like $r_{0}$, thus, by using the relation (41), $\Delta C$ will depend on $\beta_{0}$ as well. Consequently, the upper bound on the GUP parameter can be obtained by using $\Delta C(\beta_{0})$ and the constraint provided by the Event Horizon Telescope Collaboration for the deviation from circularity.

Therefore, by using $\Delta C(\beta_{0})$, given by Eq. (39), and assuming the M87* parameters, i.e., $M=(6.5\pm 0.7)\times 10^{9}M_{\odot}$ and $r_{obs}=(16.8\pm 0.8)$Mpc, the deviation from circularity reported by the Collaboration, $\Delta C(\beta_{0})<0.1$, imposes

[TABLE]

for $a_{*}\lesssim 0.99$ (with $a_{*}=a/M$) and $\theta_{o}=17^{\circ}$, for $q=1,2$ or $q=3$ in the mass function (4). As we can see in Fig. 6, the constraint on the deviation from circularity gives an upper bound on the GUP parameter, i.e., curves that satisfy $\Delta C(\beta_{0})<0.1$ with $a_{*}\lesssim 0.99$ are possible only for values given by Eq. (42). On the other hand, for $a_{*}>0.99$, the deviation from circularity is always $\Delta C(\beta_{0})>0.1$. Thus, for $\theta_{o}=17^{\circ}$, the parameter $a_{*}>0.99$ is ruled out according to M87* shadow. As I pointed out in Introduction, the value $\theta_{o}=17^{\circ}$ is conceived of as the angle between the jet and the observer, assuming that the jet direction is orthogonal to the M87* equatorial plane. The range for the rotation parameter presented here is in agreement with studies like Bambi , where the Kerr metric is adopted in order to describe the M87* shadow.

As we can see in Table 1, $\beta_{0}<10^{90}$ is the worst value compared to other upper bounds provided by different approaches, like the Lamb shift, Landau levels and scanning tunneling microscope in Ref. Das_Vagenas , or using light deflection, pulsar PRS B 1913+16 and perihelion precession in Ref. Scardigli_Casadio , or from the gravitational waves in Ref. Feng . According to Das and Vagenas Das_Vagenas , the scanning tunneling microscope delivers the best one, $\beta_{0}<10^{21}$. On the other hand, like the present work, the authors of Refs. Scardigli_Casadio and Feng present upper bounds based on gravitational phenomena, which rendered worse values than those provided by quantum systems. Quantum approaches have provided more stringent upper bounds on the GUP parameter.

V Final remarks

The Event Horizon Telescope announced the first image of a black hole. According to the collaboration, the black hole shadow is well-described by the Kerr metric. However, it is argued that other options are still possible within the M87* parameters. Bambi et al. Bambi , for example, did not rule out a superspinar as a candidate for the geometry that produces the M87* shadow. In this article, a class of rotating regular black holes (thought of as a slight deviation from the Kerr metric) is adopted in order to describe the reported shadow.

The class of rotating regular black holes studied here presents a parameter according to which regular geometries or black holes without a singularity are generated. In our work Maluf_Neves2 , such a parameter from the spacetime metric was linked to the GUP parameter. GUPs appear in theories of quantum gravity and their parameters, which deform or generalize the Heisenberg principle, have been estimated. From a reported deviation from circularity of the M87* shadow ($<10\%$), an upper bound on the GUP parameter was computed. Alongside gravitational approaches adopted in order to obtain an upper bound on the GUP parameter, the value obtained here, $\beta_{0}<10^{90}$, indicates that quantum options to estimate such a parameter are better alternatives than the gravitational options like gravitational waves, light deflection, pulsar PRS B 1913+16, perihelion precession, and the black hole shadow studied here. In general, quantum approaches provide more stringent upper bounds on the GUP parameter to date.

Acknowledgments

This study was financed in part by the Coordena o de Aperfei oamento de Pessoal de N vel Superior-Brasil (CAPES)-Finance Code 001. I thank Vilson Zanchin’s research group for comments and suggestions during a seminar presentation at the UFABC. I also thank an anonymous referee for important comments and suggestions.