Automatic Scale Estimation of Structure from Motion based 3D Models using Laser Scalers

TL;DR

This paper introduces two novel laser-based methods for accurately estimating the scale of 3D models generated by monocular structure-from-motion in GPS-denied environments, especially underwater, removing calibration constraints and manual point identification.

Contribution

The paper presents fully- and partially-calibrated laser scale estimation methods that improve accuracy and ease of use in underwater 3D modeling without requiring laser-camera alignment.

Findings

Achieved 0.3% standard deviation in scale estimation in real scenarios.

Validated methods across three laser configurations and various environmental conditions.

Removed need for laser alignment and manual point identification.

Abstract

Recent advances in structure-from-motion techniques are enabling many scientific fields to benefit from the routine creation of detailed 3D models. However, for a large number of applications, only a single camera is available, due to cost or space constraints in the survey platforms. Monocular structure-from-motion raises the issue of properly estimating the scale of the 3D models, in order to later use those models for metrology. The scale can be determined from the presence of visible objects of known dimensions, or from information on the magnitude of the camera motion provided by other sensors, such as GPS. This paper addresses the problem of accurately scaling 3D models created from monocular cameras in GPS-denied environments, such as in underwater applications. Motivated by the common availability of underwater laser scalers, we present two novel approaches. A fully-calibrated method enables the use of arbitrary laser setups, while a partially-calibrated method reduces the need for calibration by only assuming parallelism on the laser beams, with no constraints on the camera. The proposed methods have several advantages with respect to the existing methods. The need for laser alignment with the optical axis of the camera is removed, together with the extremely error-prone manual identification of image points on the 3D model. The performance of the methods and their applicability was evaluated on both data generated from a realistic 3D model and data collected during an oceanographic cruise in 2017. Three separate laser configurations have been tested, encompassing nearly all possible laser setups, to evaluate the effects of terrain roughness, noise, camera perspective angle and camera-scene distance. In the real scenario, the computation of 6 independent model scale estimates using our fully-calibrated approach, produced values with standard deviation of 0.3%.