High-low level support vector regression prediction approach (HL-SVR) for data modeling with input parameters of unequal sample sizes

TL;DR

This paper introduces HL-SVR, a novel support vector regression method designed to handle input parameters with unequal sample sizes, improving prediction accuracy in engineering data modeling.

Contribution

The paper proposes a high-low-level SVR approach that effectively models data with unequal sample sizes, enhancing prediction accuracy over traditional SVR methods.

Findings

HL-SVR outperforms conventional SVR in numerical tests.

HL-SVR provides more accurate predictions in engineering applications.

Application to dental implant stress analysis demonstrates effectiveness.

Abstract

Support vector regression (SVR) has been widely used to reduce the high computational cost of computer simulation. SVR assumes the input parameters have equal sample sizes, but unequal sample sizes are often encountered in engineering practices. To solve this issue, a new prediction approach based on SVR, namely as high-low-level SVR approach (HL-SVR) is proposed for data modeling of input parameters of unequal sample sizes in this paper. The proposed approach is consisted of low-level SVR models for the input parameters of larger sample sizes and high-level SVR model for the input parameters of smaller sample sizes. For each training point of the input parameters of smaller sample sizes, one low-level SVR model is built based on its corresponding input parameters of larger sample sizes and their responses of interest. The high-level SVR model is built based on the obtained responses from the low-level SVR models and the input parameters of smaller sample sizes. Several numerical examples are used to validate the performance of HL-SVR. The experimental results indicate that HL-SVR can produce more accurate prediction results than conventional SVR. The proposed approach is applied on the stress analysis of dental implant, which the structural parameters have massive samples but the material of implant can only be selected from several Ti and its alloys. The prediction performance of the proposed approach is much better than the conventional SVR. The proposed approach can be used for the design, optimization and analysis of engineering systems with input parameters of unequal sample sizes.