# Influence of the ambient pressure on the liquid accumulation and on the primary spray in prefilming airblast atomization

## TL;DR

This study investigates how ambient pressure affects liquid accumulation and primary spray in prefilming airblast atomization, deriving a scaling law and highlighting the importance of droplet shape in primary breakup analysis.

## Contribution

It introduces a novel scaling law relating ambient pressure to spray characteristics and proposes an objective criterion to distinguish primary from secondary breakup zones.

## Key findings

- Liquid accumulation length correlates with SMD.
- Ambient pressure influences droplet size and velocity.
- Shadowgraphy reveals non-spherical droplet shapes are significant.

## Abstract

The influence of the ambient pressure on the breakup process is investigated by means of PIV and shadowgraphy in the configuration of a planar prefilming airblast atomizer. The ambient pressure is varied from 1 to 8 bar. Other investigated parameters are the gas velocity and the film loading. From single-phase PIV measurements, it is found that the gas velocity in the vicinity of the prefilmer partly matches the analytical profile from the near-wake theory. The characteristics of the liquid accumulation are extracted from the shadowgraphy images of the liquid phase directly downstream of the prefilmer. Two different characteristic lengths, as well as the ligament velocity and a breakup frequency are determined. In addition, the droplets generated directly downstream of the liquid accumulation are captured. Hence, the spray Sauter Mean Diameter (SMD) and the mean droplet velocity are given for each operating point. The novelty of this study is that a scaling law of these quantities with regard to ambient pressure is derived. A correlation is observed between the characteristic length of the accumulation and the SMD, thus reinforcing the idea that the liquid accumulation determines the primary spray characteristics. In this paper, a threshold to distinguish the zones between primary and secondary breakup is proposed based on an objective criterion. It is also shown that taking non-spherical droplets into account significantly modifies the shape of the dropsize distribution, thus stressing the need to use shadowgraphy when investigating primary breakup. Additionally, the ambient pressure and the velocity are varied accordingly to keep the aerodynamic stress $\rho_g U_g^2$ constant. This leads to almost identical liquid accumulation and spray characteristics.