Pattern Formation Mechanism of Directionally-Solidified MoSi2/Mo5Si3 Eutectic by Phase-Field Simulation

TL;DR

This study uses phase-field simulation to understand the formation of lamellar patterns in MoSi2/Mo5Si3 eutectic composites, revealing mechanisms behind pattern regularity, discontinuity, and effects of nucleation and lattice strain.

Contribution

It introduces a phase-field model that reproduces lamellar pattern formation, including discontinuities and inclination, aligning well with experimental observations.

Findings

Simulated lamellar spacing matches experimental data.

Discontinuity caused by solid-liquid interface instability.

Nucleation frequency influences pattern randomness.

Abstract

A phase-field study has been conducted to obtain an understanding of the formation mechanism of the script lamellar pattern of MoSi2/Mo5Si3 eutectic composite, which is a promising candidate for high-temperature structural application. The spacing of the lamellar pattern in the simulation results shows good agreement with that of experimental observations and analytical solutions under three growth rates: 10 mm/h, 50 mm/h, and 100 mm/h. The discontinuity of Mo5Si3 rods, in contrast to the regular eutectic with a continuous pattern, is claimed to be caused by the instability of the solid-liquid interface. In this study, the implementation of Mo5Si3 nucleation over the solid-liquid interface has been proposed and successfully reproduced the characteristic of discontinuity. A highly random and intersected lamellar pattern similar to that observed in the ternary MoSi2/Mo5Si3 eutectic alloyed with 0.1at% Co has been obtained in simulation owing to the increase in the frequency of nucleation. In addition, it has been demonstrated that the inclination of the Mo5Si3 rod can be reproduced by taking into account the strong relaxation of lattice strain energy, which is generally considered to be negligible in eutectic reaction, as the result of the formation of ledge-terrace structure.