# Novel high efficiency quadruple junction solar cell with current matching and quantum efficiency simulations

## TL;DR

This paper presents a simulated quadruple junction solar cell with a theoretical efficiency of 47.2%, optimized for current matching and broad-spectrum photon absorption using specific material layers.

## Contribution

It introduces a novel quadruple junction design with optimized layer thicknesses and doping for maximum efficiency under standard sunlight conditions.

## Key findings

- Achieved 47.2% theoretical efficiency in simulation
- Optimized layer parameters for current matching across all junctions
- Designed to absorb from ultraviolet to infrared wavelengths

## Abstract

A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic bandgap of these materials are 1.9 eV, 1.42 eV, 1.08 eV and 0.55 eV respectively. This unique arrangement enables the cell absorb photons from ultraviolet to deep infrared wavelengths of the sunlight. Emitter and base thicknesses of the subcells and doping levels of the materials were optimized to maintain the same current in all the four junctions and to obtain the highest conversion efficiency. The short-circuit current density, open circuit voltage and fill factor of the solar cell are 14.7 mA/cm2, 3.38 V and 0.96 respectively. In our design, we considered 1 sun, AM 1.5 global solar spectrum.

---
Source: https://tomesphere.com/paper/1905.08024