High-strength cellulose-polyacrylamide hydrogels: mechanical behavior and structure depending on the type of cellulose

TL;DR

This study compares the mechanical behavior and microstructure of plant and bacterial cellulose-based hydrogels, revealing significant differences in stiffness and structural features under cyclic compression, with implications for their durability.

Contribution

It introduces a detailed analysis of how cellulose type influences the mechanical and structural properties of high-strength hydrogels under cyclic compression.

Findings

Bacterial cellulose hydrogels show decreased stiffness after multiple compressions.

Both hydrogel types withstand up to 80% compression, but bacterial ones soften significantly.

Structural features at micro- and nanoscale explain mechanical behavior differences.

Abstract

Two types of high-strength composite hydrogels possessing the structure of interpenetrating polymer networks were synthesized via free-radical polymerization of acrylamide carried out straight within the matrix of plant or bacterial cellulose swollen in the reactive solution. The mechanical behavior of synthesized hydrogels subjected to the action of compressive deformations with different amplitude values was studied. The analysis of the stress-strain curves of compression tests of the hydrogels of both types obtained in different test conditions demonstrates the substantial difference in their mechanical behavior. Both the plant cellulose-based and bacterial cellulose-based hydrogels withstand successfully the compression with the amplitude up to 80 %, but the bacterial cellulose-based compositions demonstrate in the multiple compression tests the substantial decrease of the mechanical stiffness caused by the action of compressions. This effect takes place straightly during the multiple cyclic compression tests or in the course of relaxation of previously compressed samples in water in unloaded state during 2-3 days after the first compressive tests. Being subjected to the action of the extremely sever compression (up to 80 %) the bacterial cellulose-based hydrogel varies greatly its mechanical behavior: during the subsequent compressions the stiffness of the material keeps extremely small (as compared to that registered in the first compression) up to the deformations as high as 50-60 % with the dramatic increase of the stiffness during the further loading. Submicron- and micron-scale specific features of structures of composite hydrogels of both types were studied by cryo-scanning electron microscopy to explain the peculiarities of observed mechanical effects.