Development of an Autonomous Sanding Robot with Structured-Light Technology

TL;DR

This paper introduces an autonomous sanding robot that uses structured-light technology to scan, model, and sand unknown objects without prior calibration or human supervision, demonstrating versatility and efficiency.

Contribution

The paper presents a fully autonomous sanding robot capable of handling unknown objects through integrated scanning, modeling, and motion planning, reducing human intervention.

Findings

Successful sanding of wooden boxes demonstrated

Robot adapts to various object shapes and sizes

Validated performance with a prototype

Abstract

Large demand for robotics and automation has been reflected in the sanding works, as current manual operations are labor-intensive, without consistent quality, and also subject to safety and health issues. While several machines have been developed to automate one or two steps in the sanding works, the autonomous capability of existing solutions is relatively low, and the human assistance or supervision is still heavily required in the calibration of target objects or the planning of robot motion and tasks. This paper presents the development of an autonomous sanding robot, which is able to perform the sanding works on an unknown object automatically, without any prior calibration or human intervention. The developed robot works as follows. First, the target object is scanned then modeled with the structured-light camera. Second, the robot motion is planned to cover all the surfaces of the object with an optimized transition sequence. Third, the robot is controlled to perform the sanding on the object under the desired impedance model. A prototype of the sanding robot is fabricated and its performance is validated in the task of sanding a batch of wooden boxes. With sufficient degrees of freedom (DOFs) and the module design for the end effector, the developed robot is able to provide a general solution to the autonomous sanding on many other different objects.