# Surface acoustic wave modulation of single photon emission from GaN/InGaN nanowire quantum dots

## TL;DR

This paper demonstrates dynamic, in-situ control of single photon emission from GaN/InGaN nanowire quantum dots using surface acoustic waves, enabling spectral tuning and polarization control for quantum information applications.

## Contribution

It introduces a novel method of modulating quantum dot emission properties via surface acoustic waves on nanowires, achieving spectral tuning and polarization control at high frequencies.

## Key findings

- Spectral fine-tuning within ~1.5 meV at ~330 MHz acoustic frequency.
- Observation of anti-bunching indicating single photon emission.
- SAW-induced modulation affects charge population and polarization.

## Abstract

On-chip quantum information processing requires controllable quantum light sources that can be operated on-demand at high-speeds and with the possibility of in-situ control of the photon emission wavelength and its optical polarization properties. Here, we report on the dynamic control of the optical emission from core-shell GaN/InGaN nanowire (NW) heterostructures using radio frequency surface acoustic waves (SAWs). The SAWs are excited on the surface of a piezoelectric lithium niobate crystal equipped with a SAW delay line onto which the NWs were mechanically transferred. Luminescent quantum dot (QD)-like exciton localization centers induced by compositional fluctuations within the InGaN nanoshell were identified using stroboscopic micro-photoluminescence (micro-PL) spectroscopy. They exhibit narrow and almost fully linearly polarized emission lines in the micro-PL spectra and a pronounced anti-bunching signature of single photon emission in the photon correlation experiments. When the nanowire is perturbed by the propagating SAW, the embedded QD is periodically strained and its excitonic transitions are modulated by the acousto-mechanical coupling, giving rise to a spectral fine-tuning within a ~1.5 meV bandwidth at the acoustic frequency of ~330 MHz. This outcome can be further combined with spectral detection filtering for temporal control of the emitted photons. The effect of the SAW piezoelectric field on the QD charge population and on the optical polarization degree is also observed. The advantage of the acousto-optoelectric over other control schemes is that it allows in-situ manipulation of the optical emission properties over a wide frequency range (up to GHz frequencies).

---
Source: https://tomesphere.com/paper/1902.08080