# Revisiting the buckling metrology method to determine the Young's modulus of 2D materials

## TL;DR

This paper demonstrates that the buckling metrology method is an effective, simple, and cost-efficient technique for measuring the Young's modulus of 2D materials, providing results comparable to more complex methods.

## Contribution

The study revisits and validates the buckling metrology technique as a practical alternative for mechanical testing of 2D materials without complex fabrication.

## Key findings

- Buckling metrology yields Young's modulus values consistent with advanced methods.
- The technique is simpler, faster, and more cost-effective than traditional approaches.
- It is applicable to various transition metal dichalcogenides with 3-10 layers.

## Abstract

Measuring the mechanical properties of two-dimensional materials is a formidable task. While regular electrical and optical probing techniques are suitable even for atomically thin materials, conventional mechanical tests cannot be directly applied. Therefore, new mechanical testing techniques need to be developed. Up to now, the most widespread approaches require micro-fabrication to create freely suspended membranes, rendering their implementation complex and costly. Here, we revisit a simple yet powerful technique to measure the mechanical properties of thin films. The buckling metrology method, that does not require the fabrication of freely suspended structures, is used to determine the Young's modulus of several transition metal dichalcogenides (MoS2, MoSe2, WS2 and WSe2) with thicknesses ranging from 3 to 10 layers. We critically compare the obtained values for the Young's modulus and their uncertainty, finding that this simple technique provides results, which are in good agreement with those reported using other highly sophisticated testing methods. By comparing the cost, complexity and time required for the different methods reported in the literature, the buckling metrology method presents certain advantages that makes it an interesting mechanical test tool for 2D materials.

---
Source: https://tomesphere.com/paper/1902.02803