vdW-corrected density functional study of electric field noise heating in ion traps caused by electrode surface adsorbates

TL;DR

This study uses advanced computational methods to analyze how specific surface adsorbates influence electric field noise in ion traps, revealing that chemical differences can cause significant variations in ion heating rates.

Contribution

It provides the first detailed analysis of how specific adsorbates affect electric field noise using first principles calculations, highlighting the importance of chemical specificity.

Findings

Adsorbate chemical identity can change noise by seven orders of magnitude.

Weakly-adsorbed hydrocarbons with soft in-plane modes produce the highest noise.

The fluctuating dipole model cannot fully explain the 1/ω noise frequency scaling.

Abstract

In order to realize the full potential of ion trap quantum computers, an improved understanding is required of the motional heating that trapped ions experience. Experimental studies of the temperature-, frequency-, and ion--electrode distance-dependence of the electric field noise responsible for motional heating, as well as the noise before and after ion bombardment cleaning of trap electrodes, suggest that fluctuations of adsorbate dipoles are a likely source of so-called `anomalous heating,' or motional heating of the trapped ions at a rate much higher than the Johnson noise limit. Previous computational studies have investigated how the fluctuation of model adsorbate dipoles affects anomalous heating. However, the way in which specific adsorbates affect the electric field noise has not yet been examined, and an electric dipole model employed in previous studies is only accurate for a small subset of possible adsorbates. Here, we analyze the behavior of both in-plane and out-of-plane vibrational modes of fifteen adsorbate--electrode combinations within the independent fluctuating dipole model, utilizing accurate first principles computational methods to determine the surface-induced dipole moments. We find the chemical specificity of the adsorbate can change the electric field noise by seven orders of magnitude and specifically that soft in-plane modes of weakly-adsorbed hydrocarbons produce the greatest noise and ion heating. We discuss the dynamics captured by the fluctuating dipole model, namely the adsorbate dependent turn-on temperature and electric field noise magnitude, and also discuss the model's failure to reproduce the measured 1/$\omega$ noise frequency scaling with a single adsorbate species. We suggest future research directions for improved, quantitatively predictive models based on extensions of the present framework to multiple interacting adsorbates.