Cluster-based feedback control of turbulent post-stall separated flows

TL;DR

This paper introduces a model-free, cluster-based feedback control method for turbulent post-stall separated flows, using unsupervised learning and iterative optimization to reduce power consumption over airfoils.

Contribution

It presents a novel, automated control strategy that partitions flow trajectories into clusters and optimizes control laws with limited sensor data, improving aerodynamic performance.

Findings

Control laws shift flow trajectories to favorable states.

Achieved flow control with only about 10 iterations.

Reduced flight power consumption effectively.

Abstract

We propose a novel model-free self-learning cluster-based control strategy for general nonlinear feedback flow control technique, benchmarked for high-fidelity simulations of post-stall separated flows over an airfoil. The present approach partitions the flow trajectories (force measurements) into clusters, which correspond to characteristic coarse-grained phases in a low-dimensional feature space. A feedback control law is then sought for each cluster state through iterative evaluation and downhill simplex search to minimize power consumption in flight. Unsupervised clustering of the flow trajectories for in-situ learning and optimization of coarse-grained control laws are implemented in an automated manner as key enablers. Re-routing the flow trajectories, the optimized control laws shift the cluster populations to the aerodynamically favorable states. Utilizing limited number of sensor measurements for both clustering and optimization, these feedback laws were determined in only $O(10)$ iterations. The objective of the present work is not necessarily to suppress flow separation but to minimize the desired cost function to achieve enhanced aerodynamic performance. The present control approach is applied to the control of two and three-dimensional separated flows over a NACA 0012 airfoil with large-eddy simulations at an angle of attack of $9^\circ$, Reynolds number $Re = 23,000$ and free-stream Mach number $M_\infty = 0.3$. The optimized control laws effectively minimize the flight power consumption enabling the flows to reach a low-drag state. The present work aims to address the challenges associated with adaptive feedback control design for turbulent separated flows at moderate Reynolds number.