On-Chip Implementation of Pipeline Digit-Slicing Multiplier-Less Butterfly for Fast Fourier Transform Architecture

TL;DR

This paper introduces a high-speed, resource-efficient on-chip pipeline digit-slicing multiplier-less butterfly architecture for FFT, significantly improving clock frequency and reducing complexity for wireless communication systems.

Contribution

It presents a novel digit-slicing multiplier-less butterfly design for FFT that enhances speed and reduces hardware complexity compared to conventional architectures.

Findings

Maximum clock frequency of 549.75 MHz achieved

Significant improvement over traditional FFT butterfly frequencies

Reduced hardware complexity with 31,159 gates

Abstract

The need for wireless communication has driven the communication systems to high performance. However, the main bottleneck that affects the communication capability is the Fast Fourier Transform (FFT), which is the core of most modulators. This study presents an on-chip implementation of pipeline digit-slicing multiplier-less butterfly for FFT structure. The approach is taken, in order to reduce computation complexity in the butterfly, digit-slicing multiplier-less single constant technique was utilized in the critical path of Radix-2 Decimation In Time (DIT) FFT structure. The proposed design focused on the trade-off between the speed and active silicon area for the chip implementation. The new architecture was investigated and simulated with MATLAB software. The Verilog HDL code in Xilinx ISE environment was derived to describe the FFT Butterfly functionality and was downloaded to Virtex II FPGA board. Consequently, the Virtex-II FG456 Proto board was used to implement and test the design on the real hardware. As a result, from the findings, the synthesis report indicates the maximum clock frequency of 549.75 MHz with the total equivalent gate count of 31,159 is a marked and significant improvement over Radix 2 FFT butterfly. In comparison with the conventional butterfly architecture, the design that can only run at a maximum clock frequency of 198.987 MHz and the conventional multiplier can only run at a maximum clock frequency of 220.160 MHz, the proposed system exhibits better results. The resulting maximum clock frequency increases by about 276.28% for the FFT butterfly and about 277.06% for the multiplier. It can be concluded that on-chip implementation of pipeline digit-slicing multiplier-less butterfly for FFT structure is an enabler in solving problems that affect communications capability in FFT and possesses huge potentials for future related works and research areas.