Interior X-ray diffraction tomography with low-resolution exterior information

TL;DR

This paper introduces a quasi-interior X-ray diffraction tomography method that uses low-resolution exterior data to improve interior reconstructions, enabling faster imaging without prior object knowledge.

Contribution

It proposes a novel quasi-interior XDT approach incorporating exterior data, reducing artifacts and avoiding the need for prior object constraints.

Findings

Enables ROI reconstruction with low-resolution exterior data

Reduces reconstruction artifacts in interior XDT

Allows fast, real-time imaging integration

Abstract

X-ray diffraction tomography (XDT) resolves spatially-variant XRD profiles within macroscopic objects, and provides improved material contrast compared to the conventional transmission-based computed tomography (CT). However, due to the small diffraction cross-section, XDT suffers from long imaging acquisition time, which could take tens of hours for a full scan using a table-top X-ray tube. In medical and industrial imaging applications, oftentimes only the XRD measurement within a region-of-interest (ROI) is required, which, together with the demand to reduce imaging time and radiation dose to the sample, motivates the development of interior XDT systems that scan and reconstruct only an internal region within the sample. The interior problem does not have a unique solution, and a direct inversion on the truncated projection data often leads to large reconstruction errors in ROI. To reduce the truncation artifacts, conventional attenuation-based interior reconstruction problems rely on a known region or piecewise constant constraint within the ROI, which do not apply to all the samples in XDT. Here we propose a quasi-interior XDT scheme that incorporates a small fraction of projection information from the exterior region to assist interior reconstruction. The low-resolution exterior projection data obviates the requirement for prior knowledge on the object, and allows the ROI reconstruction to be performed with the fast, widely-used filtered back-projection algorithm for easy integration into real-time XDT imaging modules.