Simulation study of light transport in laser-processed LYSO:Ce detectors with single-side readout

TL;DR

This study explores laser-processed LYSO:Ce detectors with optical barriers, demonstrating their potential to improve light collection, resolution, and DOI capabilities compared to traditional detector types.

Contribution

It introduces a novel laser-induced optical barrier technique for LYSO:Ce detectors and systematically compares its performance with standard detector configurations.

Findings

Laser-processed detectors behave between monolithic and pixelated arrays.

Rough barrier-crystal interfaces enable DOI information extraction.

Laser-processed detectors can achieve higher light collection efficiency.

Abstract

A tightly focused pulsed laser can locally modify the crystal structure inside the bulk of a scintillator. The result is incorporation of so-called optical barriers with a refractive index (RI) different from that of the crystal bulk, that can be used to redirect the scintillation light and control the light spread in the detector. We systematically study the scintillation light transport in detectors fabricated using the Laser Induced Optical Barrier technique, and objectively compare their potential performance characteristics with the two mainstream detector types: monolithic and mechanically pixelated arrays. Among countless optical barrier patterns, we explore barriers arranged in a pixel-like pattern extending all-way or half-way through a 20 mm thick LYSO:Ce crystal. We analyze the performance of the detectors coupled to MPPC arrays, in terms of light response functions, position histograms, line profiles, and light collection efficiency. Our results show that laser-processed detectors constitute a new detector category with a behavior between the two standard detector types. When the barrier-crystal interface is smooth, no DOI information can be obtained regardless of barrier RI. However, with a rough barrier-crystal interface we can extract multiple DOI levels. Lower barrier RI results in larger light confinement, leading to better transverse resolution. Laser-processed crystals can also potentially increase the light collection efficiency, which could lead to improved energy resolution and timing resolution due to higher signals. For a laser-processed detector with smooth barrier-crystal interfaces the light collection efficiency is simulated to >44%, and for rough interfaces >73%. The numbers for a monolithic crystal is 39% with polished surfaces, and 71% with rough surfaces, and for a mechanically pixelated array 33% with polished pixel surfaces and 51% with rough surfaces.