Real-time gait planner for human walking using a lower limb exoskeleton and its implementation on Exoped robot

TL;DR

This paper introduces a real-time gait planning method for exoskeletons that dynamically adjusts walking parameters during stride, using feedback-controlled trajectory generation to improve adaptability and smoothness in human walking assistance.

Contribution

It presents a novel real-time gait generation approach with feedback control, enabling dynamic parameter changes and improved trajectory smoothness for exoskeletons.

Findings

Successful simulation demonstrating smooth, continuous trajectories

Experimental testing shows good performance and user satisfaction

Enhanced adaptability over traditional pre-recorded patterns

Abstract

Lower extremity exoskeleton has been developed as a motion assistive technology in recent years. Walking pattern generation is a fundamental topic in the design of these robots. The usual approach with most exoskeletons is to use a pre-recorded pattern as a look-up table. There are some deficiencies with this method, including data storage limitation and poor regulation relating to the walking parameters. Therefore modeling human walking patterns to use in exoskeletons is required. The few existing models provide piece by piece walking patterns, only generating at the beginning of each stride cycle in respect to fixed walking parameters. In this paper, we present a real-time walking pattern generation method which enables changing the walking parameters during the stride. For this purpose, two feedback controlled third order systems are proposed as optimal trajectory planners for generating the trajectory of the x and y components of each joints position. The boundary conditions of the trajectories are obtained according to some pre-considered walking constraints. In addition, a cost function is intended for each trajectory planner in order to increase the trajectories smoothness. We use the minimum principle of Pontryagin to design the feedback controller in order to track the boundary conditions in such a way that the cost functions are minimized. Finally, by using inverse kinematics equations, the proper joints angles are generated for and implemented on Exoped robot. The good performance of the gait planner is demonstrated by second derivative continuity of the trajectories being maintained as a result of a simulation, and user satisfaction being determined by experimental testing.