A collimated beam projector for precise telescope calibration

TL;DR

This paper introduces a collimated beam projector system designed for precise telescope calibration, capable of distinguishing focusing light from stray light, and tracking optical component changes to improve photometric accuracy.

Contribution

The paper presents a novel collimated beam projector system and calibration scheme that enhances instrumental throughput measurement and monitors optical component evolution.

Findings

Prototype system successfully used with Dark Energy Camera.

Calibration scheme improves spectral and angular resolution.

System tracks changes in filter transmission and coatings.

Abstract

The precise determination of the instrumental response function versus wavelength is a central ingredient in contemporary photometric calibration strategies. This typically entails propagating narrowband illumination through the system pupil, and comparing the detected photon rate across the focal plane to the amount of incident light as measured by a calibrated photodiode. However, stray light effects and reflections/ghosting (especially on the edges of filter passbands) in the optical train constitute a major source of systematic uncertainty when using a flat-field screen as the illumination source. A collimated beam projector that projects a mask onto the focal plane of the instrument can distinguish focusing light paths from stray and scattered light, allowing for a precise determination of instrumental throughput. This paper describes the conceptual design of such a system, outlines its merits, and presents results from a prototype system used with the Dark Energy Camera wide field imager on the 4-meter Blanco telescope. A calibration scheme that blends results from flat-field images with collimated beam projector data to obtain the equivalent of an illumination correction at high spectral and angular resolution is also presented. In addition to providing a precise system throughput calibration, by monitoring the evolution of the intensity and behaviour of the ghosts in the optical system, the collimated beam projector can be used to track the evolution of the filter transmission properties and various anti-reflective coatings in the optical system.