A MEMS-scale vibration energy harvester based on coupled component structure and bi-stable states

TL;DR

This paper presents a novel MEMS-scale nonlinear vibration energy harvester utilizing coupled component structures and bi-stable states, aiming to improve energy harvesting efficiency from low-frequency vibrations.

Contribution

It introduces a unique MEMS design with coupled components and bi-stable states, including fabrication details and potential performance under vibration conditions.

Findings

Design successfully integrates coupled components and bi-stable states.

Fabrication process involves PECVD of silicon nitride.

Device shows promise for efficient vibration energy harvesting.

Abstract

Due to the rapid growth in demand for power for sensing devices located in remote locations, scientists' attention has been drawn to vibration energy harvesting as an alternative to batteries. As a result of over two decades of micro-scale vibration energy harvester research, the use of mechanical nonlinearity in the dynamic behavior of the piezoelectric power generating structures had been recognized as one of the promising solutions to the challenges presented by chaotic, low-frequency vibration sources found in common application environments. In this study, the design and performance of a unique MEMS-scale nonlinear vibration energy harvester based on coupled component structures and bi-stable states are investigated. The coupled-components within the device consist of a main buckled beam bonded with piezoelectric layers, a torsional rod, and two cantilever arms with tip masses at their ends. These arms are connected to the main beam through the torsional rod and are designed to help the main beam snap between its buckled stable states when subjected to sufficient vibration loading. The fabrication of the device will be discussed, including use of plasma-enhanced chemical vapor deposition (PECVD) of silicon nitride under an alternating power field to control compressive stress development within the main buckled beam. After completing the fabrication process, the next step would be testing the device under a variety of vibration loading conditions for its potential use as a vibration energy harvester.