The Impact of Transceiver Noise on Digital Nonlinearity Compensation

TL;DR

This paper analyzes how transceiver noise affects digital nonlinearity compensation (NLC) in optical fiber systems, providing models and formulas to optimize split NLC configurations for improved signal quality and reach.

Contribution

It introduces an analytical model for SNR in split NLC systems considering transceiver noise, and derives formulas for optimal NLC split ratio and reach gains under different noise regimes.

Findings

Transceiver noise significantly impacts NLC performance at short distances.

Optimal NLC split ratio varies with noise regimes and distance.

Properly tailored split NLC can achieve up to 56% reach gain over conventional methods.

Abstract

The efficiency of digital nonlinearity compensation (NLC) is analyzed in the presence of noise arising from amplified spontaneous emission noise (ASE) as well as from a non-ideal transceiver subsystem. Its impact on signal-to-noise ratio (SNR) and reach increase is studied with particular emphasis on split NLC, where the digital back-propagation algorithm is divided between transmitter and receiver. An analytical model is presented to compute the SNR's for non-ideal transmission systems with arbitrary split NLC configurations. When signal-signal nonlinearities are compensated, the performance limitation arises from residual signal-noise interactions. These interactions consist of nonlinear beating between the signal and co-propagating ASE and transceiver noise. While transceiver noise-signal beating is usually dominant for short transmission distances, ASE noise-signal beating is dominant for larger transmission distances. It is shown that both regimes behave differently with respect to the optimal NLC split ratio and their respective reach gains. Additionally, simple formulas for the prediction of the optimal NLC split ratio and the reach increase in those two regimes are reported. It is found that split NLC offers negligible gain with respect to conventional digital back-propagation (DBP) for distances less than 1000 km using standard single-mode fibers and a transceiver (back-to-back) SNR of 26 dB, when transmitter and receiver inject the same amount of noise. However, when transmitter and receiver inject an unequal amount of noise, reach gains of 56% on top of DBP are achievable by properly tailoring the split NLC algorithm. The theoretical findings are confirmed by numerical simulations.