Efficient acceleration of a dense plasma projectile to hyper velocities in the laser-induced cavity pressure acceleration scheme

TL;DR

This paper demonstrates a highly efficient method for accelerating dense plasma projectiles to hyper velocities using laser-induced cavity pressure acceleration, achieving record velocities and efficiencies with moderate-energy lasers.

Contribution

It introduces an optimized LICPA scheme that significantly improves plasma projectile acceleration efficiency and velocity compared to traditional methods.

Findings

Achieved 140 km/s velocity for a 4 microgram gold plasma projectile.

Attained acceleration efficiency of 15-19%, surpassing previous methods.

Demonstrated potential for high-energy-density matter creation and fusion applications.

Abstract

The experimental study of the plasma projectile acceleration in the laser-induced cavity pressure acceleration (LICPA) scheme is reported. In the experiment performed at the kilojoule PALS laser facility, the parameters of the projectile were measured using interferometry, a streak camera and ion diagnostics, and the measurements were supported by two-dimensional hydrodynamic simulations. It is shown that in the LICPA accelerator with a 200-J laser driver, a 4 microgram gold plasma projectile is accelerated to the velocity of 140 km/s with the energetic acceleration efficiency of 15-19 percent which is at least several times higher than those achieved with the commonly used ablative acceleration and the highest among the ones measured so far for any projectiles accelerated to the velocities above 100 km/s. This achievement opens the possibility of creation and investigation of high-energy-density matter states with the use of moderate-energy lasers and may also have an impact on the development of the impact ignition approach to inertial confinement fusion.