Ring Oscillators for Clocking Reversible Superconducting Circuits and Fabrication Process Benchmarking

TL;DR

This paper demonstrates a Josephson junction-based ring oscillator capable of providing multi-phase bias signals for reversible superconducting circuits, with a focus on fabrication process improvements and energy dissipation analysis.

Contribution

It introduces a novel Josephson junction ring oscillator for multi-phase biasing and benchmarks a fabrication process showing significant reduction in critical current.

Findings

Ring oscillator behavior verified across vortex counts

Energy dissipation per vortex passage estimated at 10kBT

Fabrication process achieves 200-fold reduction in critical current

Abstract

Existing concepts of reversible superconducting circuits as well as demonstrated adiabatic circuits require three-phase bias/clock signals generated by room temperature sources. A while ago, we suggested that a multi-phase bias/clock could be provided by a local Josephson junction-based generator. The generator looks like a long annular Josephson junction, only composed of discreet elements - junctions and inductors, and closed into a ring via a flux pump to inject any required number of vortices into the ring. A steady motion of the vortices forced by a uniformly distributed dc bias current applied to the ring is accompanied by a nearly harmonic ac currents flowing via the Josephson junctions (JJs) connected in series with small inductors. These ac currents serve as multi-phase bias/clock for nSQUID-based circuitry. To verify this concept and compare the dissipated energy with kBTln2 threshold, we developed a ring composed of 256 unshunted JJs with 20 {\mu}A target critical current, Ic. We investigated the behavior of the ring oscillator at each vortex count from 0 to 256. The measured critical current of the ring with vortices was about 0.1 {\mu}A per one JJ, which can be explained by unavoidable nonuniformity of the ring components and the influence of fluxes frozen near the ring. The corresponding energy dissipation, about 10kBT per passage of one vortex through one JJ, should be reduced further for prospective experiments with reversible circuits. However, obtained I-V characteristics could be of interest for scientists working with long Josephson junctions. Superiority of the fabrication process used in this work is demonstrated by the obtained about 200 times reduction of Ic of the ring with vortices with respect to a single comprising JJ, much larger than in any previously described case.