# Time-Resolved and Temperature Tuneable Measurements of Fluorescent   Intensity using a Smartphone Fluorimeter

**Authors:** Md Arafat Hossain, John Canning, Zhikang Yu, Sandra Ast, Peter J., Rutledge, Joseph K.H. Wong, Abbas Jamalipour, and Maxwell J. Crossley

arXiv: 1703.00350 · 2017-05-11

## TL;DR

This paper presents a smartphone-based fluorimeter capable of time-resolved fluorescence measurements across a temperature range, enabling detailed characterization of fluorescent emitters and chemosensors with temperature-dependent kinetics.

## Contribution

The study introduces a portable, temperature-tunable smartphone fluorimeter with integrated UV excitation, CMOS detection, and microcontroller control for real-time fluorescence analysis.

## Key findings

- Fluorescence intensity varies with temperature for tested emitters.
- Kinetic rates of chemosensor responses increase with temperature.
- Device achieves temperature resolution of 0.1°C and measurement interval of 4 seconds.

## Abstract

A smartphone fluorimeter capable of time-based fluorescence intensity measurements at various temperatures is reported. Excitation is provided by an integrated UV LED (370 nm) and detection obtained using the in-built CMOS camera. A Peltier is integrated to allow measurements of the intensity over T = 10 to 40 C with a maximum temperature resolution of DELTA T ~ 0.1 C. All components are controlled using a smartphone battery powered Arduino microcontroller and a customised Android application that allows sequential fluorescence imaging and quantification every DELTA t = 4 seconds. The temperature dependence of fluorescence intensity for four emitters (Rhodamine B, Rhodamine 6G, 5,10,15,20-tetraphenylporphyrin and 6-(1,4,8,11-tetraazacyclotetradecane)2-ethyl-naphthalimide) are characterised. The normalised fluorescence intensity over time of the latter chemosensor dye complex in the presence of Zn ion is observed to accelerate with an increasing rate constant, k = 1.94 min-1 at T = 15 C and k = 3.64 min-1 at T = 30 C, approaching a factor of ~ 2 with only a change in temperature of DELTA T = 15 C. Thermally tuning these twist and bend associated rates to optimise sensor approaches and device applications is proposed.

---
Source: https://tomesphere.com/paper/1703.00350