# Separation delay via hydro-acoustic control of a NACA4412 airfoil in pre-stalled conditions

## TL;DR

This study uses large-eddy simulations to demonstrate that hydro-acoustic control via impedance boundary conditions can delay flow separation on a NACA4412 airfoil by inducing Kelvin-Helmholtz rollers, leading to increased lift.

## Contribution

It introduces a novel passive flow control method using hydro-acoustically tuned resonant panels to enhance mixing and delay separation in turbulent flows.

## Key findings

- Separation delay achieved with up to +13% lift increase.
- Kelvin-Helmholtz rollers generated by hydro-acoustic instabilities enhance mixing.
- Tuning resonant cavities below natural shedding frequency is effective.

## Abstract

We have performed large-eddy simulations of turbulent separation control via impedance boundary conditions (IBCs) on a \nacafft airfoil in near-stalled conditions. The uncontrolled baseline flow is obtained for freestream Mach numbers of $M_\infty=0.3$, chord-Reynolds numbers $Re_c = 1.5\times10^6$ and angle of attack, $\alpha=14^{\circ{}}$. Flow control is applied via imposition of complex IBCs using the time-domain implementation developed by Scalo, Bodart, and Lele, $\textit{Phys. Fluids} $(2015). Separation is delayed due to the enhanced mixing associated with convectively amplified spanwise-oriented Kelvin-Helmholtz (KH) rollers, generated via hydro-acoustic instabilities. The latter are the result of the interaction of the wall-normal transpiration through the impedance panel and the overlying mean background shear. The result is an alteration of the coupled instability between the separating shear layer and the vortex shedding in the wake (already present in the uncontrolled baseline flow) yielding unique wake topologies associated with different intensities for the passively generated KH vortical structures. Specifically, enhancements up to +13\% in the lift coefficients have been obtained. Results show that tuning of the resonant cavities below the natural shedding frequency is required to generate KH rollers structures with a sufficiently large entrainment diameter to encompass the full extent of the separated region, thereby enhancing mixing and promoting reattachment. Overall, the results presented in this work show that the adoption of hydro-acoustically tuned resonant panels is a promising passive control technique for boundary layer separation control.