# Intelligent real-time MEMS sensor fusion and calibration

## TL;DR

This paper introduces an adaptive real-time sensor fusion algorithm for MEMS sensors that improves dynamic response and calibration efficiency, enabling faster convergence and on-the-fly thermal drift compensation.

## Contribution

It presents a novel adaptive fusion algorithm based on MSE estimation and a real-time machine learning calibration method for MEMS sensors.

## Key findings

- Faster convergence than extended Kalman filter.
- Comparable steady-state error performance with improved dynamic response.
- Real-time calibration effectively compensates thermal drift.

## Abstract

This paper discusses an innovative adaptive heterogeneous fusion algorithm based on estimation of the mean square error of all variables used in real time processing. The algorithm is designed for a fusion between derivative and absolute sensors and is explained by the fusion of the 3-axial gyroscope, 3-axial accelerometer and 3-axial magnetometer into attitude and heading estimation. Our algorithm has similar error performance in the steady state but much faster dynamic response compared to the fixed-gain fusion algorithm. In comparison with the extended Kalman filter the proposed algorithm converges faster and takes less computational time. On the other hand, Kalman filter has smaller mean square output error in a steady state but becomes unstable if the estimated state changes too rapidly. Additionally, the noisy fusion deviation can be used in the process of calibration. The paper proposes and explains a real-time calibration method based on machine learning working in the online mode during run-time. This allows compensation of sensor thermal drift right in the sensors working environment without need of re-calibration in the laboratory.

---
Source: https://tomesphere.com/paper/1701.07594