# High-Q microcavity enhanced optical properties of CuInS$_{2}$/ZnS colloidal quantum dots towards non-photodegradation

## TL;DR

This study demonstrates that high-Q microcavities significantly enhance the photoluminescence of CuInS$_{2}$/ZnS colloidal quantum dots at room temperature, overcoming photodegradation issues and enabling high-efficiency photon emission.

## Contribution

The paper introduces the use of high-Q microdisks to boost PL and prevent photodegradation in CuInS$_{2}$/ZnS QDs, a novel approach for stable, high-efficiency quantum dot emitters.

## Key findings

- PL enhancement by over 20 times at room temperature
- Photobleaching is suppressed using high-Q cavities at low excitation power
- Photooxidation effects are mitigated in vacuum conditions

## Abstract

We report on a temporal evolution of photoluminescence (PL) spectroscopy of CuInS$_{2}$/ZnS colloidal quantum dots (QDs) by drop-casting on SiO$_{2}$/Si substrates and high quality factor microdisks (MDs) under different atmospheric conditions. Fast PL decay, peak blueshift and linewidth broadening due to photooxidation have been observed at low excitation power. With further increasing of the excitation power, the PL peak position shows a redshift and linewidth becomes narrow, which is ascribed to the enhanced F$\ddot{o}$rster resonant energy transfer between different QDs by photoinduced agglomeration. The oxygen plays an important role in optically induced PL decay which is verified by reduced photobleaching effect in vacuum. When the QDs drop-casted on MDs, photooxidation and photobleaching are accelerated because the excitation efficiency is greatly enhanced with coupling the pumping laser with the cavity modes. However, when the emitted photons couple with cavity modes, a PL enhancement by more than 20 times is achieved because of the increased extraction efficiency and Purcell effects of MDs at room temperature (RT), and 35 times at 20 K. The photobleaching can be avoided with a small excitation power but with a strong PL intensity by taking advantages of high quality factor cavities. The high efficient PL emission without photodegradation is very promising for using CuInS$_{2}$ QDs as high efficient photon emitters at RT, where the photodegradation has always been limiting the practical applications of colloidal quantum dots.