Low Power SI Class E Power Amplifier and RF Switch For Health Care

TL;DR

This paper presents the design of a low-power 2.4 GHz Class E power amplifier and RF switch using CMOS and SOI technologies, aiming for high performance and low cost in healthcare applications.

Contribution

It introduces a novel design of a 2.4 GHz Class E power amplifier and RF switch optimized for healthcare, utilizing specific CMOS and SOI processes.

Findings

Power amplifier transmits 16dBm output to 50Ω load

Design meets specified performance requirements

Uses CMOS and SOI fabrication processes

Abstract

This research was to design a 2.4 GHz class E Power Amplifier (PA) for health care, with 0.18um Semiconductor Manufacturing International Corporation CMOS technology by using Cadence software. And also RF switch was designed at cadence software with power Jazz 180nm SOI process. The ultimate goal for such application is to reach high performance and low cost, and between high performance and low power consumption design. This paper introduces the design of a 2.4GHz class E power amplifier and RF switch design. PA consists of cascade stage with negative capacitance. This power amplifier can transmit 16dBm output power to a 50{\Omega} load. The performance of the power amplifier and switch meet the specification requirements of the desired.