Low pH, high salinity: too much for Microbial Fuel Cells?
Nicole Jannelli, Rosa Anna Nastro, Viviana Cigolotti and, Mariagiovanna Minutillo, Giacomo Falcucci

TL;DR
This study evaluates the performance of tubular microbial fuel cells operating at low pH and high salinity, highlighting their potential despite environmental challenges and suggesting avenues for optimization.
Contribution
It demonstrates the feasibility of TMFCs under harsh conditions and provides data on power density and COD removal, encouraging further development as sustainable alternatives.
Findings
Power density ranged from 20 to 55 mW/m²·kg_waste
COD removal was about 45% after 28 days
Low pH and membrane fouling limited performance
Abstract
Twelve single chambered, air-cathode Tubular Microbial Fuel Cells (TMFCs) have been filled up with fruit and vegetable residues. The anodes were realized by means of a carbon fiber brush, while the cathodes were realized through a graphite-based porous ceramic disk with Nafion membranes (117 Dupont). The performances in terms of polarization curves and power production were assessed according to different operating conditions: percentage of solid substrate water dilution, adoption of freshwater and a 35mg/L NaCl water solution and, finally, the effect of an initial potentiostatic growth. All TMFCs operated at low pH (pH), as no pH amendment was carried out. Despite the harsh environmental conditions, our TMFCs showed a Power Density (PD) ranging from 20 to 55~mW/mkg and a maximum CD of 20~mA/mkg, referred to the…
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
