A high precision technique to correct for residual atmospheric dispersion in high-contrast imaging systems

TL;DR

This paper introduces a novel on-sky measurement and correction method for residual atmospheric dispersion in high-contrast imaging systems, significantly improving PSF stability for exoplanet detection.

Contribution

It presents the first on-sky measurement and correction technique for residual atmospheric dispersion using adaptive speckle diagnostics, enhancing ADC performance in high-contrast imaging.

Findings

Reduced residual atmospheric dispersion from 18.8 mas to 4.2 mas in broadband light

Achieved residual dispersion of 1.4 mas in H-band only

Demonstrated on-sky correction improves high-contrast imaging capabilities

Abstract

Direct detection and spectroscopy of exoplanets requires high contrast imaging. For habitable exoplanets in particular, located at small angular separation from the host star, it is crucial to employ small inner working angle (IWA) coronagraphs that efficiently suppress starlight. These coronagraphs, in turn, require careful control of the wavefront which directly impacts their performance. For ground-based telescopes, atmospheric refraction is also an important factor, since it results in a smearing of the PSF, that can no longer be efficiently suppressed by the coronagraph. Traditionally, atmospheric refraction is compensated for by an atmospheric dispersion compensator (ADC). ADC control relies on an a priori model of the atmosphere whose parameters are solely based on the pointing of the telescope, which can result in imperfect compensation. For a high contrast instrument like the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system, which employs very small IWA coronagraphs, refraction-induced smearing of the PSF has to be less than 1 mas in the science band for optimum performance. In this paper, we present the first on-sky measurement and correction of residual atmospheric dispersion. Atmospheric dispersion is measured from the science image directly, using an adaptive grid of artificially introduced speckles as a diagnostic to feedback to the telescope's ADC. With our current setup, we were able to reduce the initial residual atmospheric dispersion from 18.8 mas to 4.2 in broadband light (y- to H-band), and to 1.4 mas in H-band only. This work is particularly relevant to the upcoming extremely large telescopes (ELTs) that will require fine control of their ADC to reach their full high contrast imaging potential.