Adaptive foveated single-pixel imaging with dynamic super-sampling

TL;DR

This paper introduces a foveated single-pixel imaging system that dynamically adapts resolution and sampling based on scene motion, significantly improving imaging speed and detail capture for rapidly changing scenes.

Contribution

It presents a novel foveated imaging framework that exploits scene redundancy to reduce measurement time and adapt resolution dynamically, enhancing single-pixel camera performance.

Findings

Achieved four-fold reduction in measurement time for dynamic features

Enabled spatially varying resolution and exposure in video reconstruction

Demonstrated compatibility with existing compressive sensing methods

Abstract

As an alternative to conventional multi-pixel cameras, single-pixel cameras enable images to be recorded using a single detector that measures the correlations between the scene and a set of patterns. However, to fully sample a scene in this way requires at least the same number of correlation measurements as there are pixels in the reconstructed image. Therefore single-pixel imaging systems typically exhibit low frame-rates. To mitigate this, a range of compressive sensing techniques have been developed which rely on a priori knowledge of the scene to reconstruct images from an under-sampled set of measurements. In this work we take a different approach and adopt a strategy inspired by the foveated vision systems found in the animal kingdom - a framework that exploits the spatio-temporal redundancy present in many dynamic scenes. In our single-pixel imaging system a high-resolution foveal region follows motion within the scene, but unlike a simple zoom, every frame delivers new spatial information from across the entire field-of-view. Using this approach we demonstrate a four-fold reduction in the time taken to record the detail of rapidly evolving features, whilst simultaneously accumulating detail of more slowly evolving regions over several consecutive frames. This tiered super-sampling technique enables the reconstruction of video streams in which both the resolution and the effective exposure-time spatially vary and adapt dynamically in response to the evolution of the scene. The methods described here can complement existing compressive sensing approaches and may be applied to enhance a variety of computational imagers that rely on sequential correlation measurements.