Sensitive Phase Gratings for X-ray Phase Contrast - a Simulation-based Comparison
Oliver Preusche

TL;DR
This paper introduces novel phase grating geometries for X-ray phase contrast imaging that double sensitivity without sacrificing visibility, demonstrated through simulation comparisons of interference patterns.
Contribution
It proposes two new grating geometries, including a novel three-level design, enabling higher sensitivity in X-ray phase contrast imaging while maintaining or improving visibility.
Findings
Proposed geometries double the sensitivity compared to conventional gratings.
Simulations show potential for improved or maintained visibility at higher sensitivities.
New designs are effective across different photon energies and coherence conditions.
Abstract
Medical differential phase contrast x-ray imaging (DPCI) promises improved soft-tissue contrast at lower x-ray dose. The dose strongly depends on both the angular sensitivity and on the visibility of a grating-based Talbot-Lau interferometer. Using a conventional x-ray tube, a high sensitivity and a high visibility are somewhat contradicting goals: To increase sensitivity, the grating period has to be reduced and/or the grating distance increased. Technically, this means using a higher Talbot order (3rd or 5th one instead of first one). This however reduces the visibility somewhat, because only a smaller part of the tube spectrum will get used. This work proposes to relax this problem by changing the phase grating geometry. This allows to double sensitivity (i.e., double the Talbot order) without reducing the visibility. One proposed grating geometry is an older binary one (75% of a…
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
