Intelligent Low-level RF System by Non-destructive Beam Monitoring Device for Cyclotrons
M. S. Sharifi Asadi Malafeh, M. Ghergherehchi, H. Afarideh, J.S. Chai

TL;DR
This paper presents an intelligent low-level RF system for cyclotrons that uses non-destructive beam monitoring and a tunable filter to stabilize acceleration without microcontroller signal processing.
Contribution
The design introduces an ILLRF system that simplifies RF phase detection and enhances stability for AVF cyclotrons using beam monitoring and tunable filters.
Findings
Effective RF stabilization achieved
No microcontroller signal processing needed
Applicable to most AVF cyclotrons
Abstract
The project of a10MeV PET cyclotron accelerator for medical diagnosis and treatment was started at Amirkabir University of Technology in 2012. The low-level RF system of cyclotron accelerator is designed to stabilize acceleration voltage and control the resonance frequency of the cavity. In this work Intelligent Low Level Radio Frequency Circuit or ILLRF suitable for Most of the AVF cyclotron accelerators was designed by the beam monitoring device and narrow band tunable band-pass filter. In this design, for the RF phase detection does not need to signal processing by microcontroller
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
Taxonomy
TopicsParticle accelerators and beam dynamics · Gyrotron and Vacuum Electronics Research · Advanced MEMS and NEMS Technologies
