Green Wireless Power Transfer Networks

TL;DR

This paper introduces and experimentally evaluates two green control protocols for wireless power transfer networks that significantly reduce energy consumption and improve efficiency by intelligently managing the charger operation.

Contribution

It proposes and tests beaconing and probing protocols to optimize charger activity, reducing unnecessary energy use in wireless power transfer networks.

Findings

Up to 80% energy savings in WPTN operation.

Increased efficiency by 5.5 times with minimal energy reduction.

Effective reduction of idle charging through proposed protocols.

Abstract

A Wireless Power Transfer Network (WPTN) aims to support devices with cable-less energy on-demand. Unfortunately, wireless power transfer itself-especially through radio frequency radiation rectification-is fairly inefficient due to decaying power with distance, antenna polarization, etc. Consequently, idle charging needs to be minimized to reduce already large costs of providing energy to the receivers and at the same time reduce the carbon footprint of WPTNs. In turn, energy saving in a WPTN can be boosted by simply switching off the energy transmitter when the received energy is too weak for rectification. Therefore in this paper we propose, and experimentally evaluate, two "green" protocols for the control plane of static charger/mobile receiver WPTN aimed at optimizing the charger workflow to make WPTN green. Those protocols are: 'beaconing', where receivers advertise their presence to WPTN, and 'probing' exploiting the receiver feedback from WTPN on the level of received energy. We demonstrate that both protocols reduce the unnecessary WTPN uptime, however trading it for the reduced energy provision, compared to the base case of 'WPTN charger always on'. For example, our system (in our experiments) saves at most approx. 80% of energy and increases 5.5 times the efficiency with only approx. 17% less energy possibly harvested.