Pedestrian Flow Simulation Validation and Verification Techniques

TL;DR

This paper presents techniques for validating and verifying microscopic pedestrian flow simulation models by comparing them with real-world experiments and video recordings, aiming to improve accuracy and reliability.

Contribution

It introduces a validation and verification framework using experimental data and video analysis for pedestrian flow models, including practical applications like pilgrim stream simulation.

Findings

Models can accurately reproduce pedestrian flow scenarios

Validation identifies critical points in pedestrian areas

Simulation results support better facility design

Abstract

For the verification and validation of microscopic simulation models of pedestrian flow, we have performed experiments for different kind of facilities and sites where most conflicts and congestion happens e.g. corridors, narrow passages, and crosswalks. The validity of the model should compare the experimental conditions and simulation results with video recording carried out in the same condition like in real life e.g. pedestrian flux and density distributions. The strategy in this technique is to achieve a certain amount of accuracy required in the simulation model. This method is good at detecting the critical points in the pedestrians walking areas. For the calibration of suitable models we use the results obtained from analyzing the video recordings in Hajj 2009 and these results can be used to check the design sections of pedestrian facilities and exits. As practical examples, we present the simulation of pilgrim streams on the Jamarat bridge. The objectives of this study are twofold: first, to show through verification and validation that simulation tools can be used to reproduce realistic scenarios, and second, gather data for accurate predictions for designers and decision makers.