Self-consistent Modeling of the $I_c$ of HTS Devices: How Accurate do Models Really Need to Be?

TL;DR

This paper presents a numerical model for accurately predicting the critical current of HTS devices by extracting Jc(B,theta) from experimental data, considering self-field effects and device interactions, showing good agreement with measurements.

Contribution

The paper introduces a practical, self-consistent numerical model that simplifies the determination of Jc(B,theta) and effectively predicts the critical current of complex HTS devices.

Findings

Model accurately reproduces experimental Ic values.

Multiple Jc(B,theta) sets can fit the data well.

Experimental conditions influence measured Ic values.

Abstract

Numerical models for computing the effective critical current of devices made of HTS tapes require the knowledge of the Jc(B,theta) dependence, i.e. of the way the critical current density Jc depends on the magnetic flux density B and its orientation theta with respect to the tape. In this paper we present a numerical model based on the critical state with angular field dependence of Jc to extract the Jc(B,theta) relation from experimental data. The model takes into account the self-field created by the tape, which gives an important contribution when the field applied in the experiments is low. The same model can also be used to compute the effective critical current of devices composed of electromagnetically interacting tapes. Three examples are considered here: two differently current rated Roebel cables composed of REBCO coated conductors and a power cable prototype composed of Bi-2223 tapes. The critical currents computed with the numerical model show good agreement with the measured ones. The simulations reveal also that several parameter sets in the Jc(B,theta) give an equally good representation of the experimental characterization of the tapes and that the measured Ic values of cables are subjected to the influence of experimental conditions, such as Ic degradation due to the manufacturing and assembling process and non-uniformity of the tape properties. These two aspects make the determination of a very precise Jc(B,theta) expression probably unnecessary, as long as that expression is able to reproduce the main features of the angular dependence. The easiness of use of this model, which can be straightforwardly implemented in finite-element programs able to solve static electromagnetic problems, is very attractive both for researchers and devices manufactures who want to characterize superconducting tapes and calculate the effective critical current of superconducting devices.