Revisiting the spread spectrum effect in radio interferometric imaging: a sparse variant of the w-projection algorithm

TL;DR

This paper introduces a sparse variant of the w-projection algorithm for radio interferometric imaging, demonstrating that varying w-components improve image reconstruction quality by enhancing the spread spectrum effect.

Contribution

It proposes an adaptive, sparse matrix w-projection algorithm for efficient handling of varying w-components in radio interferometry, improving image reconstruction fidelity.

Findings

Varying w-components significantly enhance reconstruction quality.

The sparse w-projection algorithm is computationally efficient and adaptable.

Optimizing large w-components can improve future telescope imaging fidelity.

Abstract

Next-generation radio interferometric telescopes will exhibit non-coplanar baseline configurations and wide field-of-views, inducing a w-modulation of the sky image, which in turn induces the spread spectrum effect. We revisit the impact of this effect on imaging quality and study a new algorithmic strategy to deal with the associated operator in the image reconstruction process. In previous studies it has been shown that image recovery in the framework of compressed sensing is improved due to the spread spectrum effect, where the w-modulation can act to increase the incoherence between measurement and sparsifying signal representations. For the purpose of computational efficiency, idealised experiments were performed, where only a constant baseline component w in the pointing direction of the telescope was considered. We extend this analysis to the more realistic setting where the w-component varies for each visibility measurement. Firstly, incorporating varying w-components into imaging algorithms is a computational demanding task. We propose a variant of the w-projection algorithm for this purpose, which is based on an adaptive sparsification procedure, and incorporate it in compressed sensing imaging methods. This sparse matrix variant of the w-projection algorithm is generic and adapts to the support of each kernel. Consequently, it is applicable for all types of direction-dependent effects. Secondly, we show that for w-modulation with varying w-components, reconstruction quality is significantly improved compared to the setting where there is no w-modulation (i.e. w=0), reaching levels comparable to the quality of a constant, maximal w-component. This finding confirms that one may seek to optimise future telescope configurations to promote large w-components, thus enhancing the spread spectrum effect and consequently the fidelity of image reconstruction.