GUI Based Automatic Remote Control of Gas Reduction System using PIC Microcontroller
Ayad Ghany Ismaeel, Raghad Zuhair Yousif, Essa F. Abdallh

TL;DR
This paper presents an automated remote control system for a Gas Reduction System at Erbil Power Station, using a PIC microcontroller and a GUI for full automation and remote operation.
Contribution
It introduces a novel embedded automation system integrating PIC microcontroller with a GUI for remote control of GRS, replacing manual operations.
Findings
Successful automation of GRS operations
Remote control capability implemented and tested
Full automatic control achieved from remote location
Abstract
The GRS is a one of the important units in Erbil Power Station EPS, which is responsible on controlling gas pressure and gas temperature this unit previously works manually. The local control panel for GRS system contains two types of digital signals the first one indicated by Light Emitting Diodes LED to point normal operations, fault and alarm, and event of operations while the second indicated by ON-OFF switches, which consists of two types the push buttons switch and mode selector switch. To overcome human in manual control faults in controlling GRS systems, automation system becomes the best solution. The purpose of this research is to design and implement embedded automation system that can be used to control a GRS automatically through a GUI and from remote location by using programmable interface controller (PIC16F877A). In this research the (PIC) software which is based on (C…
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
Taxonomy
TopicsIoT-based Smart Home Systems · Water Quality Monitoring Technologies · Smart Grid Energy Management
