Determination of Friction Coefficient in Unconfined Compression of Brain Tissue

TL;DR

This study estimates the dynamic friction coefficient in unconfined compression tests of porcine brain tissue using experimental and computational methods, revealing its dependence on strain rate and test conditions, which aids in accurate mechanical property assessment.

Contribution

It provides the first comprehensive estimation of the dynamic friction coefficient for brain tissue across various strain rates and conditions, improving test reliability.

Findings

Friction coefficient increases with strain rate.

Friction coefficient varies with lubricant and contact conditions.

Results aid in more accurate brain tissue mechanical testing.

Abstract

Unconfined compression tests are more convenient to perform on cylindrical samples of brain tissue than tensile tests in order to estimate mechanical properties of the brain tissue because they allow for homogeneous deformations. The reliability of these tests depends significantly on the amount of friction generated at the specimen/platen interface. Thus, there is a crucial need to find an approximate value of the friction coefficient in order to predict a possible overestimation of stresses during unconfined compression tests. In this study, a combined experimental-computational approach was adopted to estimate the dynamic friction coefficient mu of porcine brain matter against metal platens in compressive tests. Cylindrical samples of porcine brain tissue were tested up to 30% strain at variable strain rates, both under bonded and lubricated conditions in the same controlled environment. It was established that mu was equal to 0.09 +/- 0.03, 0.18 +/- 0.04, 0.18 +/- 0.04 and 0.20 +/- 0.02 at strain rates of 1, 30, 60 and 90/s, respectively. Additional tests were also performed to analyze brain tissue under lubricated and bonded conditions, with and without initial contact of the top platen with the brain tissue, with different specimen aspect ratios and with different lubricants (Phosphate Buffer Saline (PBS), Polytetrafluoroethylene (PTFE) and Silicon). The test conditions (lubricant used, biological tissue, loading velocity) adopted in this study were similar to the studies conducted by other research groups. This study will help to understand the amount of friction generated during unconfined compression of brain tissue for strain rates of up to 90/s.