Tag Spotting at the Interference Range

TL;DR

This paper introduces tag spotting, a reliable low-SNR communication method enabling control data transmission beyond traditional range, facilitating better interference management and resource allocation in wireless networks.

Contribution

It presents a novel tag spotting system employing advanced encoding techniques for reliable control data transmission at 0 dB SNR, validated through real-world experiments and simulations.

Findings

Achieves reliable control data transmission at 0 dB SNR with 6% overhead.

Demonstrates real-world feasibility with software radios.

Shows potential for improved rate control and scheduling in wireless networks.

Abstract

In wireless networks, the presence of interference among wireless links in- troduces dependencies among flows that do not share a single link or node. As a result, when designing a resource allocation scheme, be it a medium access scheduler or a flow rate controller, one needs to consider the interdependence among nodes within interference range of each other. Specifically, control plane information needs to reach nearby nodes which often lie outside the communi- cation range, but within the interference range of a node of interest. But how can one communicate control plane information well beyond the existing communication range? To address this fundamental need we introduce tag spotting. Tag spotting refers to a communication system which allows re- liable control data transmission at SNR values as low as 0 dB. It does this by employing a number of signal encoding techniques including adding redundancy to multitone modulation, shaping the spectrum to reduce inter-carrier interfer- ence, and the use of algebraic coding. Making use of a detection theory-based model we analyze the performance achievable by our modulation as well as the trade-off between the rate of the information transmitted and the likelihood of error. Using real-world experiments on an OFDM system built with software radios, we show that we can transmit data at the target SNR value of 0 dB with a 6% overhead; that is, 6% of our packet is used for our low-SNR decodable tags (which carry up to a couple of bytes of data in our testbed), while the remain- ing 94% is used for traditional header and payload data. We also demonstrate via simulations how tag spotting can be used in implementing fair and efficient rate control and scheduling schemes.