A Novel Construction of Multi-group Decodable Space-Time Block Codes

TL;DR

This paper introduces a new method for constructing multi-group decodable space-time block codes that maximizes data rate while maintaining full diversity, specifically for unitary weight codes with multiple orthogonal groups.

Contribution

It develops a recursive approach to find the highest achievable rates for UW-g-group decodable STBCs with multiple groups, expanding the design space beyond previous methods.

Findings

Maximum achievable rates are identified for UW-g-group decodable STBCs.

An exhaustive search method is extended for codes with more than two groups.

The approach guarantees full symbol-wise diversity for the constructed codes.

Abstract

Complex Orthogonal Design (COD) codes are known to have the lowest detection complexity among Space-Time Block Codes (STBCs). However, the rate of square COD codes decreases exponentially with the number of transmit antennas. The Quasi-Orthogonal Design (QOD) codes emerged to provide a compromise between rate and complexity as they offer higher rates compared to COD codes at the expense of an increase of decoding complexity through partially relaxing the orthogonality conditions. The QOD codes were then generalized with the so called g-symbol and g-group decodable STBCs where the number of orthogonal groups of symbols is no longer restricted to two as in the QOD case. However, the adopted approach for the construction of such codes is based on sufficient but not necessary conditions which may limit the achievable rates for any number of orthogonal groups. In this paper, we limit ourselves to the case of Unitary Weight (UW)-g-group decodable STBCs for 2^a transmit antennas where the weight matrices are required to be single thread matrices with non-zero entries in {1,-1,j,-j} and address the problem of finding the highest achievable rate for any number of orthogonal groups. This special type of weight matrices guarantees full symbol-wise diversity and subsumes a wide range of existing codes in the literature. We show that in this case an exhaustive search can be applied to find the maximum achievable rates for UW-g-group decodable STBCs with g>1. For this purpose, we extend our previously proposed approach for constructing UW-2-group decodable STBCs based on necessary and sufficient conditions to the case of UW-g-group decodable STBCs in a recursive manner.