An Approach to Elastoplasticity at Large Deformations

TL;DR

This paper proposes a new finite elastoplasticity approach combining hyperelasticity with additive velocity gradient decomposition, avoiding issues of hypoelasticity and incompatible plastic configurations in large deformation analysis.

Contribution

It introduces a novel elastoplasticity framework that integrates hyperelasticity with additive velocity gradient decomposition, improving physical consistency in large deformation modeling.

Findings

The new model avoids nonphysical energy dissipation.

It extends classical metal plasticity theory to large deformations.

The approach is applied to simple shear deformation analysis.

Abstract

Finite plasticity theories are still a subject of controversy and lively discussions. Among the approaches to finite elastoplasticity two became especially popular. The first, implemented in the commercial finite element codes, is based on the introduction of a hypoelastic constitutive law and the additive elastic-plastic decomposition of the deformation rate tensor. Unfortunately, the use of hypoelasticity may lead to a nonphysical creation or dissipation of energy in a closed deformation cycle. In order to replace hypoelasticity with hyperelasticity the second popular approach based on the multiplicative elastic-plastic decomposition of the deformation gradient tensor was developed. Unluckily, the latter theory is not perfect as well because it introduces intermediate plastic configurations, which are geometrically incompatible, non-unique, and, consequently, fictitious physically. In the present work, an attempt is made to combine strengths of the described approaches avoiding their drawbacks. Particularly, a tensor of the plastic deformation rate is introduced in the additive elastic-plastic decomposition of the velocity gradient. This tensor is used in the flow rule defined by the generalized isotropic Reiner-Rivlin fluid. The tensor of the plastic deformation rate is also used in an evolution equation that allows calculating an elastic strain tensor which, in its turn, is used in the hyperelastic constitutive law. Thus, the present approach employs hyperelasticity and the additive decomposition of the velocity gradient avoiding nonphysical hypoelasticity and the multiplicative decomposition of the deformation gradient associated with incompatible plastic configurations. The developed finite elastoplasticity framework for isotropic materials is specified to extend the classical -theory of metal plasticity to large deformations and the simple shear deformation is analyzed.