Fiber-laser-pumped Ti:sapphire laser
G. K. Samanta, S. Chaitanya Kumar, Kavita Devi, and M. Ebrahim-Zadeh

TL;DR
This paper demonstrates a high-power, efficient Ti:sapphire laser pumped by a simple fiber-laser green source, achieving tunable output with stable power and spectral characteristics.
Contribution
It introduces a novel, compact fiber-laser-pumped Ti:sapphire laser system with high efficiency and tunability, using direct SHG of a cw Yb-fiber laser for pumping.
Findings
Achieved 2.7 W tunable Ti:sapphire laser output.
Demonstrated stable operation with low power fluctuation.
Used a simple fiber-laser green source for pumping.
Abstract
We report the first experimental demonstration of efficient and high-power operation of a Ti:sapphire laser pumped by a simple, compact, continuous-wave (cw) fiber-laser-based green source. The pump radiation is obtained by direct single-pass second-harmonic-generation (SHG) of a 33-W, cw Yb-fiber laser in 30-mm-long MgO:sPPLT crystal, providing 11 W of single-frequency green power at 532 nm in TEM00 spatial profile with power and frequency stability better than 3.3% and 32 MHz, respectively, over one hour. The Ti:sapphire laser is continuously tunable across 743-970 nm and can deliver an output power up to 2.7 W with a slope efficiency as high as 32.8% under optimum output coupling of 20%. The laser output has a TEM00 spatial profile with M2<1.44 across the tuning range and exhibits a peak-to-peak power fluctuation below 5.1% over 1 hour.
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
Taxonomy
TopicsSolid State Laser Technologies · Photonic Crystal and Fiber Optics · Laser Material Processing Techniques
