UNICS - An Unified Instrument Control System for Small/Medium Sized Astronomical Observatories

TL;DR

UNICS is a cost-effective, unified control system designed for small and medium-sized astronomical observatories, integrating various instruments with modern hardware and software for efficient operations.

Contribution

The paper introduces UNICS, a novel, low-cost, multipurpose instrument control system that simplifies and unifies control processes for smaller observatories, reducing development efforts and costs.

Findings

UNICS has been operational since March 2008 on a 2m telescope.

It effectively integrates multiple instruments and provides real-time feedback.

The system is built around a micro-controller and Linux-based GUI.

Abstract

Although the astronomy community is witnessing an era of large telescopes, smaller and medium sized telescopes still maintain their utility being larger in numbers. In order to obtain better scientific outputs it is necessary to incorporate modern and advanced technologies to the back-end instruments and to their interfaces with the telescopes through various control processes. However often tight financial constraints on the smaller and medium size observatories limit the scope and utility of these systems. Most of the time for every new development on the telescope the back-end control systems are required to be built from scratch leading to high costs and efforts. Therefore a simple, low cost control system for small and medium size observatory needs to be developed to minimize the cost and efforts while going for the expansion of the observatory. Here we report on the development of a modern, multipurpose instrument control system UNICS (Unified Instrument Control System) to integrate the controls of various instruments and devices mounted on the telescope. UNICS consists of an embedded hardware unit called Common Control Unit (CCU) and Linux based data acquisition and User Interface. The Hardware of the CCU is built around the Atmel make ATmega 128 micro-controller and is designed with a back-plane, Master Slave architecture. The Graphical User Interface (GUI) has been developed based on QT and the back end application software is based on C/C++. UNICS provides feedback mechanisms which give the operator a good visibility and a quick-look display of the status and modes of instruments. UNICS is being used for regular science observations since March 2008 on 2m, f/10 IUCAA Telescope located at Girawali, Pune India.