Feedback control of unstable steady states of flow past a flat plate using reduced-order estimators

TL;DR

This paper develops an estimator-based control method using reduced-order models to stabilize unstable steady states in flow past a flat plate, demonstrating effective suppression of vortex shedding.

Contribution

It extends reduced-order control design to unstable systems by incorporating unstable eigenmodes and develops a snapshot-based algorithm for flow stabilization.

Findings

Successfully stabilizes an unstable steady state in flow over a flat plate.

Accurately reconstructs flow fields from limited sensor data.

Suppresses vortex shedding even with nonlinear effects present.

Abstract

We present an estimator-based control design procedure for flow control, using reduced-order models of the governing equations, linearized about a possibly unstable steady state. The reduced models are obtained using an approximate balanced truncation method that retains the most controllable and observable modes of the system. The original method is valid only for stable linear systems, and we present an extension to unstable linear systems. The dynamics on the unstable subspace are represented by projecting the original equations onto the global unstable eigenmodes, assumed to be small in number. A snapshot-based algorithm is developed, using approximate balanced truncation, for obtaining a reduced-order model of the dynamics on the stable subspace. The proposed algorithm is used to study feedback control of 2-D flow over a flat plate at a low Reynolds number and at large angles of attack, where the natural flow is vortex shedding, though there also exists an unstable steady state. For control design, we derive reduced-order models valid in the neighborhood of this unstable steady state. The actuation is modeled as a localized body force near the leading edge of the flat plate, and the sensors are two velocity measurements in the near-wake of the plate. A reduced-order Kalman filter is developed based on these models and is shown to accurately reconstruct the flow field from the sensor measurements, and the resulting estimator-based control is shown to stabilize the unstable steady state. For small perturbations of the steady state, the model accurately predicts the response of the full simulation. Furthermore, the resulting controller is even able to suppress the stable periodic vortex shedding, where the nonlinear effects are strong, thus implying a large domain of attraction of the stabilized steady state.