Transport, magnetic, and structural properties of La$_{0.7}$Ce$_{0.3}$MnO$_3$ thin films. Evidence for hole-doping

TL;DR

This study investigates cerium-doped manganite thin films, revealing that oxygen content and annealing influence their structural, magnetic, and electronic properties, with evidence supporting hole-doping as the dominant charge carrier mechanism.

Contribution

It provides comprehensive analysis combining XRD, TEM, XPS, and XAS data to demonstrate hole-doping in Ce-doped manganite films and clarifies the effects of oxygen content and film thickness.

Findings

Oxygen annealing increases metal-insulator transition temperature.

Hall measurements confirm holes as dominant charge carriers.

XAS indicates Mn valence shift from 2+ to 4+ with increased oxygen content.

Abstract

Cerium-doped manganite thin films were grown epitaxially by pulsed laser deposition at $720 ^\circ$C and oxygen pressure $p_{O_2}=1-25 $Pa and were subjected to different annealing steps. According to x-ray diffraction (XRD) data, the formation of CeO$_2$ as a secondary phase could be avoided for $p_{O_2}\ge 8 $Pa. However, transmission electron microscopy shows the presence of CeO$_2$ nanoclusters, even in those films which appear to be single phase in XRD. With O$_2$ annealing, the metal-to-insulator transition temperature increases, while the saturation magnetization decreases and stays well below the theoretical value for electron-doped La$_{0.7}$Ce$_{0.3}$MnO$_3$ with mixed Mn$^{3+}$/Mn$^{2+}$ valences. The same trend is observed with decreasing film thickness from 100 to 20 nm, indicating a higher oxygen content for thinner films. Hall measurements on a film which shows a metal-to-insulator transition clearly reveal holes as dominating charge carriers. Combining data from x-ray photoemission spectroscopy, for determination of the oxygen content, and x-ray absorption spectroscopy (XAS), for determination of the hole concentration and cation valences, we find that with increasing oxygen content the hole concentration increases and Mn valences are shifted from 2+ to 4+. The dominating Mn valences in the films are Mn$^{3+}$ and Mn$^{4+}$, and only a small amount of Mn$^{2+}$ ions can be observed by XAS. Mn$^{2+}$ and Ce$^{4+}$ XAS signals obtained in surface-sensitive total electron yield mode are strongly reduced in the bulk-sensitive fluorescence mode, which indicates hole-doping in the bulk for those films which do show a metal-to-insulator transition.