On capacity of wireless ad hoc networks with MIMO MMSE receivers

TL;DR

This paper analyzes the capacity of MIMO ad-hoc networks by considering the actual physical layer interference, moving beyond the single-antenna assumption, and deriving the SINR distribution to guide medium access protocol design.

Contribution

It introduces a novel capacity analysis for MIMO ad-hoc networks that accounts for multiple antennas and actual interference, unlike previous models.

Findings

Derived the probability distribution of post-detection SINR.

Characterized the spatial resource occupation by links based on interference.

Provided guidelines for medium access protocol design.

Abstract

Widely adopted at home, business places, and hot spots, wireless ad-hoc networks are expected to provide broadband services parallel to their wired counterparts in near future. To address this need, MIMO techniques, which are capable of offering several-fold increase in capacity, hold significant promise. Most previous work on capacity analysis of ad-hoc networks is based on an implicit assumption that each node has only one antenna. Core to the analysis therein is the characterization of a geometric area, referred to as the exclusion region, which quantizes the amount of spatial resource occupied by a link. When multiple antennas are deployed at each node, however, multiple links can transmit in the vicinity of each other simultaneously, as interference can now be suppressed by spatial signal processing. As such, a link no longer exclusively occupies a geometric area, making the concept of "exclusion region" not applicable any more. In this paper, we investigate link-layer throughput capacity of MIMO ad-hoc networks. In contrast to previous work, the amount of spatial resource occupied by each link is characterized by the actual interference it imposes on other links. To calculate the link-layer capacity, we first derive the probability distribution of post-detection SINR at a receiver. The result is then used to calculate the number of active links and the corresponding data rates that can be sustained within an area. Our analysis will serve as a guideline for the design of medium access protocols for MIMO ad-hoc networks. To the best of knowledge, this paper is the first attempt to characterize the capacity of MIMO ad-hoc networks by considering the actual PHY-layer signal and interference model.