Nanostructuring Optical Waveguides by Focused Ion Beam Milling. Near-Field Characterization
F. Lacour (FEMTO-ST/Lopmd), A. Sabac (FEMTO-ST/Lopmd), M. Spajer, (FEMTO-ST/Lopmd)

TL;DR
This paper explores the fabrication and near-field optical characterization of nanostructures in waveguides using focused ion beam milling, addressing challenges in precise nanostructure creation and assessment.
Contribution
It demonstrates a two-step fabrication process combining traditional waveguides with nanostructures and employs near-field microscopy for effective optical characterization.
Findings
Successful nanostructure fabrication via FIB milling
Effective near-field optical testing of waveguide confinement
Integration of nanostructures with traditional waveguides
Abstract
Nanostructures have become an attractive subject due to many applications, particularly the photonic bandgap effect observed in photonic crystals. Nevertheless, the fabrication of such structures remains a challenge because of accurate requirement concerning regularity, shape, hole depth etc. of the structure. E-beam lithography permits a good control of dimensional parameters but needs a 1-step fabrication process. In our work, we have to combine traditional strip-load waveguides (SiO2/SiON/SiO2 on Si) and nanostructures whose dimension are totally different. This imposes a 2-step process where waveguides and nanostructures are successively fabricated. We have at our disposal different ways to characterize these nanostructures. A direct aspect control during and after FIB treatment can be achieved by FIB and SEM imaging. Scanning near-field optical microscopy (SNOM) is currently the…
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
Taxonomy
TopicsNear-Field Optical Microscopy · Integrated Circuits and Semiconductor Failure Analysis · Force Microscopy Techniques and Applications
The reference list from the paper itself. Each links out to its DOI / PubMed record.
- 1(1) J. D. Joannopoulos and R. D. Meale and J. N. Winn, ”Photonic Crystals, Molding the Flow of Light”, princeton University Press (1995).
- 2(2) E. Chow, S. Y. Lin, S.G. Johnson, P. R. Villeneuve, J. D. Joannopoulos, J. R. Wendt, G. A. Vawter, W. Zubrzycki, H. Hou and A. Alleman, Nature 407 , 983 (2000).
- 3(3) M. Józwik, C. Gorecki, A. Sabac, P. Delobelle and M. Kujawińska, Optics and Lasers Engineering, 41 , 703 (2004).
- 4(4) F. Lacour, N. Courjal, M.-P. Bernal, A. Sabac, C. Bainier and M. Spajer, Opt. Mater. 27 , 1421 (2005).
- 5(5) G. Dale, R.M. Langford, P.J.S. Ewen and C.M. Reeves,J. Non-crystalline Solids, 266 , 913 (2000).
- 6(6) J. Gierak, D. Mailly, G. Faini, J.L. Pelouard, P. Denk, F. Pardo, J.Y. Marzin, A. Septier, G. Schmid, J. Ferr , R. Hydman, C. Chappert, J. Flicstein, B. Gayral and J.M. G rard, Microelect. Eng., 57 , 865 (2001).
- 7(7) C. G. Bostan, R. M. de Ridder, V. J. Gadgil, L. Kuipers and A. Driessen, Proceedings Symposium IEEE/LEOS (Benelux chapter, Enschede, 2003), p.253.
- 8(8) R. Ferrini, B. Lombardet, B. Wild, R. Houdré and G. H. Duan, App. Phys. Lett. 82 , 1009 (2003).
