Finite Mirror Effects in Advanced Interferometric Gravitational Wave Detectors

TL;DR

This paper analyzes hyperboloidal beam shapes for advanced gravitational wave detectors, optimizing mirror configurations to minimize thermal noise and diffraction loss, and introduces methods to account for finite mirror effects.

Contribution

It introduces a detailed analysis of hyperboloidal beams, develops a code for direct diffraction loss computation, and proposes an iterative mirror reconstruction method to reduce thermal noise.

Findings

Hyperboloidal beams become Gaussian at infinite beam width.

Optimal beam parameters balance diffraction loss and thermal noise.

Mirror reconstruction can significantly reduce coating thermal noise.

Abstract

Thermal noise is expected to be the dominant source of noise in the most sensitive frequency band of second generation ground based gravitational wave detectors. Reshaping the beam to a flatter wider profile which probes more of the mirror surface reduces this noise. The "Mesa" beam shape has been proposed for this purpose and was subsequently generalized to a family of hyperboloidal beams with two parameters: twist angle alpha and beam width D. Varying alpha allows a continuous transition from the nearly-flat to the nearly-concentric Mesa beam configurations. We analytically prove that in the limit of infinite D hyperboloidal beams become Gaussians. The Advanced LIGO diffraction loss design constraint is 1 ppm per bounce. In the past the diffraction loss has often been calculated using the clipping approximation that, in general, underestimates the diffraction loss. We develop a code using pseudo-spectral methods to compute the diffraction loss directly from the propagator. We find that the diffraction loss is not a strictly monotonic function of beam width, but has local minima that occur due to finite mirror effects and leads to natural choices of D. For the Mesa beam a local minimum occurs at D = 10.67 cm and leads to a diffraction loss of 1.4 ppm. We find that if one requires a diffraction loss of strictly 1 ppm, the alpha = 0.91 pi hyperboloidal beam is optimal, leading to the coating thermal noise being lower by about 10% than for a Mesa beam while other types of thermal noise decrease as well. We then develop an iterative process that reconstructs the mirror to specifically account for finite mirror effects. This allows us to increase the D parameter and lower the coating noise by about 30% compared to the original Mesa configuration.