# The Design of a Novel Prismatic Drive for a Three-DOF   Parallel-Kinematics Machine

**Authors:** J\'erome Renotte (IRCCyN), Damien Chablat (IRCCyN), Jorge Angeles, (CIM)

arXiv: 0705.1217 · 2007-05-23

## TL;DR

This paper introduces a novel prismatic drive based on Slide-O-Cam, optimized for use in a three-DOF parallel robot, offering reduced friction and improved performance for machining applications.

## Contribution

It presents the design and optimization of a new cam-based prismatic drive specifically for parallel-kinematics machines, enhancing their efficiency.

## Key findings

- Reduced friction compared to traditional rack-and-pinions
- Effective replacement of ball-screws in Orthoglide
- Potential for improved machining performance

## Abstract

The design of a novel prismatic drive is reported in this paper. This transmission is based on Slide-O-Cam, a cam mechanism with multiple rollers mounted on a common translating follower. The design of Slide-O-Cam was reported elsewhere. This drive thus provides pure-rolling motion, thereby reducing the friction of rack-and-pinions and linear drives. Such properties can be used to design new transmissions for parallel-kinematics machines. In this paper, this transmission is optimized to replace ball-screws in Orthoglide, a three-DOF parallel robot optimized for machining applications.

## Full text

Tomesphere does not host the full text of arXiv papers. Read it on arXiv: https://arxiv.org/abs/0705.1217

## References

10 references — full list in the complete paper: https://tomesphere.com/paper/0705.1217/full.md

---
Source: https://tomesphere.com/paper/0705.1217